Dreambox DM 600 PVR Bedienungsanleitung User Manual Digitaler Satellitenempfänger zum Empfang von freien und verschlüsselten DVB-Programmen. Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB).
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Table of contents 1. Before initial operation of the receiver 1.1 Safety instructions ....................................................................................... 6 1.2 Packaging contents ..................................................................................... 9 1.3 Views 1.4 .................................................................................................... 10 1.3.1 Explanation Front Panel ........
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 5. Electronic Program Guide - EPG ........................................................... 27 6. Edit the channellist 6.1 Adding a new Bouquet .............................................................................. 31 6.2 Adding services to an existing Bouquet..................................................... 32 6.3 Editing a Bouquet ..................................................................................... 34 6.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 10. Setup 10.1 Setting the time zone................................................................................. 66 10.1.1 Manual time correction .................................................................. 68 10.2 Audio/Video settings.................................................................................. 69 10.3 Keyboard ...................................................................................................
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.4 2 satellites via Toneburst ............................................................ 96 11.3.5 2 satellites via 22KHz (Highband only) ....................................... 97 11.3.6 2 satellites via DiSEqC A/B......................................................... 98 11.3.7 4 satellites via DiSEqC OPT A/B ................................................ 99 11.3.8 Many satellites via DiSEqC Rotor...............................
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 1. english Before initial operation of the receiver 1.1 Safety instructions Please read the safety instructions completely and carefully, before using the Dreambox. The Manufacturer takes no responsibility for damages as a result of incorrect handling of the Dreambox. - Allow enough space around the Dreambox for sufficient ventilation. - Do not cover the top of the Dreambox and allow enough space to other devices.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Shut down - In case your Dreambox is in use for a longer period of time disconnect the power plug from the power outlet. - During thunder storm the unit should also be physically disconnected from the power outlet. Additional safety instructions - (Dis-)Connecting to a LNB: Turn the Dreambox off before you connect or disconnect a cable coming from or going to a LNB.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Disposal instructions The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 1.2 english Packaging contents Please check the completeness of the box’s contents. Included in box: 2 Batteries (1,5V Mignon / AA / LR6) Dreambox DM 600 PVR Remote control 1 Power cord 1 Power supply CWT 12V, 2A, 24W 1 Rear panel for C/T-Tuner operation 1 IDE-Cable (already installed inside the device) 1 User manual (most recent version online: http://www.dream-multimedia-tv.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 1.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 1.3.1 Explanation Front Panel Smartcard Reader Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia. Standby LED The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the Dreambox is powered on.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Video output (FBAS) You can optionally connect your Dreambox to a TV using a RCA/Chinch cable. (Composite) Audio output - analog (Cinch) Connect your Dreambox with a RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX In or Tape In ports). Serial interface (RS232C, Sub-D, 9-pin) The Serial Port is used to update the operating system. Please connect a serial null modem cable here.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 1.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Important notes about operation All functions of the Dreambox can be controlled via OSD-Menu (On-Screen-Display). This makes the handling of the Dreambox very easy for you. All options are indicated by four colored dots or beams (red, green, yellow, blue) in the OSD-Menu and can be started with the Option-Buttons on the Remote Control. Depending on the chosen Menu, these options do change.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Remote Control Buttons MENU-Button If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu. The OSD main menu has the following options: - (1) TV Mode - (2) Radio Mode - (3) File Mode - (4) Information - (5) Shutdown - (6) Setup - (7) Games - (8) Timer You can switch to the needed option by pressing the Navigation-Buttons left or right. Also see: Important notes about operation.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Numeric-Keypad Enter a service number to directly access the option by using the Numeric Keypad. The service numbers are on the left side of the service list. The Numeric Keypad can also be used to enter the teletext page number when you are in TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext information; otherwise this feature cannot be used.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Volume +/- Buttons The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing - will turn it down. Bouquet +/- Buttons Pressing the Bouquet +/- Buttons will jump back and forth between the bouquets. AUDIO-Button By pressing the AUDIO-Button you can choose the different audio tracks offered by the station. VIDEO-Button Pressing the VIDEO-Button activates the PVR-Mode.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 2. Installation 2.1 Turning the device on english - Insert 2 AA (1,5V) batteries, taking care to observe the + and - markings indicated inside, into the remote control. - Before using the Dreambox, please read the safety instructions. - Connect the LNB or antenna with a coaxial cable to LNB or Antenna In at your Dreambox. - Connect the Dreambox with a Scart cable to your television screen.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 3. english Start wizard Der Startassistent führt Sie durch die Grundeinstellungen Ihrer Dreambox. 3.1 TV-System Please choose the used TV system first. Press the green Options-Button on your remote to get to the next step. 3.2 Language Select your desired and language with the Navigation-Buttons up and down. Press the OKButton to activate. 3.3 Timezone Select your desired and timezone with the Navigation-Buttons left and right.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 3.4 english DiSEqC-Configuration Please refer to Section 11.3.2 Sattelite configuration for detailed information about this option. 3.5 Service Scan Please refer to Section 11.3.2 Service searching for detailed information about this option.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 4. Basic operation 4.1 Turning your Dreambox on and off english Use the Standby-Button to turn your Dreambox on and off. To put your Dreambox into Standby-Mode either press the Standby-Button on your remote control or on your Dreambox. Holding down the Standby-Button on your remote control for three seconds will show the Shutdown / Standby menu. This is the Shutdown / Standby menu. Navigate to the desired option and confirm by pressing the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 4.3 english Changing channel using the service list Pressing the Up/Down-Buttons on your remote control activates the service list. Use the Navigation-Buttons up/down to select the desired service and press the OK-Button to change to the selected service. 4.4 Controlling the volume The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing will turn it down. Pressing the MUTE-Button mutes the volume.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 4.6 english Sub Services The green dot in the Infobar appears if the selected station transmits sub services. Attention: In PVR-Mode these buttons are used to control the digital recording. Pressing the green Options-Button in TV or Radio mode will reveal the sub services menu. Use the Navigation-Buttons up and down to move to one of the sub services. Press the OK-Button to select.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 4.9 english Infobar The Infobar appears and disappears by pressing the OK-Button once, if no OSD menu is shown on your screen. The Infobar shows all necessary Information about the selected service.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 4.10 english Main OSD menu If no OSD menu is shown on your screen you can access the main OSD menu by pressing the Menu-Button on your remote control. Through the main OSD menu you can access the submenus and functions of your Dreambox. Please use the Navigation-Buttons left and right or up and down, depending on you main OSD menu’s view, to access the desired functions and submenus. Use the OKButton to activate your selection.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Selecting this symbol takes you to the setup menu. You can change all your Dreambox’s settings in the setup menu. Selecting this symbol takes you to the games. Selecting this symbol takes you to the Timer menu. All set timers can be viewed, changed and deleted here. Through the menu options (5) Setup -> (3) System -> (6) OSD Settings -> You can choose to view the main OSD menu as a regular menu. See section OSD Settings. 4.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 5. english Electronic Program Guide - EPG The red dot in the Infobar appears if the selected station transmits EPG information. Attention: In PVR-Mode these buttons are used to control the digital recording. If no OSD menu is visible on your screen and you are in TV mode press the TV-Button to access the service list. Press the Info-Button to get to the selection of the EPG style.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Pressing the green Options-Button will show the “Timer Edit” menu. Use the Navigation-Buttons to reach the desired option and use the OK-Button to open up the drop down menus. Change the setting to fit your needs. The drop down menu „Switch“ offers the same options that you can directly access from the EPG using the colored Options-Buttons. „Switch“ will switch to the desired service. „NGrab“ will record via LAN.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english If you selected Multi-EPG when you were asked for the EPG style you will see this view. Use the Navigation-Buttons to navigate to the desired event. The current selection is highlighted gray. Pressing the Info-Button once will show additional information. Pressing the Info-Button again will return you to the Multi-EPG screen. Pressing the OK-Button in Multi-EPG mode will directly switch to the selected service.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 6. english Edit the channellist What is a bouquet? A bouquet can be thought of something like a folder. Every channel equals a page in this folder and the pages are sorted into categories. This way you can create a bouquet called “Kids”, for example, under which you “file” all childern’s stations. Another example would be to create a bouquet called „Sports“ where you put all sports channels. This way you can create several topic related bouquets.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You are asked for the type of Bouquet you want to add. In our example we add a TV Bouquet. Press the OK-Button. Using the Numeric Keypad on your remote control and pressing the numbers several times will let you choose the desired letters and numbers. Pressing the yellow Options-Button will toggle between capital and small letters. Pressing the blue Options-Button toggles between numeric and regular mode.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 6.2 english Adding services to an existing Bouquet Please read the section Service organizing – Adding a new Bouquet to learn how to get into this menu. Navigate to the option “Add services to bouquet” and press the OK-Button. You are asked for the type of Bouquet you want to add. In our example we add a TV Bouquet. Press the OK-Button. You are asked in which Bouquet to place the service. We will use our freshly created “my new bouquet” in this example.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You can now choose whether to take a service from the provider list or service list or the new services list. Note: All services that were not found in your services list when you did an automatic transponder scan will be saved in the new services list. We will use the provider list in our example. Press the OK-Button. The provider list will show up. In our example we will choose the provider “ARD”. Press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 6.3 english Editing a Bouquet Please read the section Service organizing – Adding a new Bouquet to learn how to get into this menu. Navigate to the option “Edit bouquets” and press the OK-Button. In our example we will edit a TV Bouquet. Press the OK-Button to edit the TV Bouquets. In our example we will edit our freshly created “my own bouquet” Bouquet. Select it and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Pressing the red Options-Button will delete the service from the Bouquet. Attention: This will happen without question if you really want to do it! Pressing the green Options-Button will pick up the selected service and enable you to move its position in the Bouquet. Pressing the green Options-Button again will release the service. Pressing the yellow Options-Buttons will let you rename the selected service.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 6.4 english Parental lock and Setup lock If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Parental lock” and press the OK-Button. You can activate the parental and setup lock in this menu. It prevents anyone else from having unauthorized access to certain services, videos and MP3s.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 6.4.1 Activating the parental lock Please read the section Parental lock and Setup lock to learn how to get into this menu. Check the checkbox in front of “Parental lock” by pressing the OK-Button. The Option “Change PIN” will appear. Navigate to the option “Change PIN” and press the OK-Button. You also choose to hide all locked services form the service list by checking the checkbox in front of the “Hide locked services” option.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english If everything went right you will be prompted that your PIN has been changed. Press the OK-Button. If the PIN you entered twice are not the same you will be prompted this error message. Pressing the green Options-Button will let you reenter your PIN and try again. Pressing the red Options-Button will abort. Press the green Options-Button to save your settings. You will be taken back to the “Setup” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Deactivating the parental lock Please read the section Parental lock and Setup lock to learn how to get into this menu. Uncheck the checkbox in front of “Parental lock” by pressing the OK-Button. You will be prompted for your current PIN. Enter your PIN to deactivate the parental lock. The check in front of “Parental lock” is now gone. Press the green Options-Button to save your settings. You will be taken back to the “Setup” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 6.4.2 Activating the setup lock Please read the section Parental lock and Setup lock to learn how to get into this menu. Check the checkbox in front of “Setup lock” by pressing the OK-Button. The Option “Change PIN” will appear. Navigate to the option “Change PIN” and press the OK-Button. Enter a four digit PIN with the Numeric Keypad on your remote control. Attention: Entering “0000” as your PIN will deactivate any locks.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english If everything went right you will be prompted that your PIN has been changed. Press the OK-Button. If the PIN you entered twice are not the same you will be prompted this error message. Pressing the green Options-Button will let you reenter your PIN and try again. Pressing the red Options-Button will abort. Press the green Options-Button to save your settings. You will be taken back to the “Setup” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Deactivating the setup lock Please read the section Parental lock and Setup lock to learn how to get into this menu. Uncheck the checkbox in front of “Setup lock” by pressing the OK-Button. You will be prompted for your current PIN. Enter your PIN to deactivate the setup lock. The check in front of “Setup lock” is now gone. Press the green Options-Button to save your settings. You will be taken back to the “Setup” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 6.5 english Locking a service Please read the section Parental lock and Setup lock to learn how activate the parental lock. Press the OK-Button to open the service list. Navigate to the service you want to lock and press the Menu-Button. You can lock any entry of your choice in the service list. (All services, Satellites, Providers and Bouquets) Navigate to the option “Lock” and press the OKButton to lock a service.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Unlocking a service Press the OK-Button to open the service list. Navigate to the service you want to unlock and press the Menu-Button. You can unlock any entry of your choice in the service list. (All services, Satellites, Providers and Bouquets) . Navigate to the option “Unlock” and press the OKButton to unlock a service. You will prompted for your PIN. .
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 7. Hard disk operation 7.1 Mounting guidelines english This chapter describes how to mount a hard disk inside your Dreambox DM 7025. Please always adhere to ESD (Electrostatic Discharge) regulations when handling electronic devices. Make sure that you are grounded. Do not open the device in your living room or in any other rooms with carpeting or any other flooring that can carry an electrostatic charge. Remove all connection from the device.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Parts list 1 Dreambox (including the 6 Phillips screws for the cover and the hard disk cage). The IDE cable is already installed inside the Dreambox DM600 PVR. 1 Phillips screwdriver 1 Hard disk of your choice 4 Hard disk mounting screws (not included) Action: Remove these 2 screws on the rear panel. Remove this screw at the right side of the device. Remove this screw at the left side of the device.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Lift the cover on the sides on slide it backwards.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Remove the 2 screws from the hard disk cage. Remove the hard disk cage by lifting it upwards. Now you need the Phillips screwdriver, the hard disk cage, the 4 hard disk mounting screws and your hard disk. Attach the hard disk cage to the hard disk. Pay attention to the correct mount of the hard disk in the hard disk cage. Set the jumper of the hard disk to cable select. This information usually is printed on the hard disk.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Put the hard disk cage back into the Dreambox and connect the IDE cable to the hard disk. Screw the two screws back onto the hard disk cage. Slide the cover from the rear back onto the device. Screw the one screw on each side and the two screws on the rear back into place. Reattach all connector to your Dreambox. Attach the power cord as last.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 7.2 english Management If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OKButton. Navigate to the option “Hard disk” and press the OK-Button. Navigate to the option “Samsung SV8004H (master 78.188 GB)” and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.2.1 Hard disk formatting Please read the section Hard disk Management to learn how to get into this menu. The Hard disk Management dialog will open up. Press the red Options-Button to format the Hard disk. Press the yellow Options-Button to run a Hard disk check. Press the Exit-Button to quit. You will be asked if you really want to format the Hard disk. Press the red Options-Button to abort.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 7.3 english Recording 7.3.1 Instant recording The Dreambox DM 600PVR offers you several methods to record a film. The standard solution is recording onto a built-in hard disk. Additionally you can record via Ethernet using a so called NFS mount or a NGrab server, if you have no hard disk installed in your Dreambox. Right now we assume that you have installed a hard disk in your Dreambox. Press the VIDEO-Button to access the PVR mode.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.3.2 Stop recording Press the TV-Button again and you will be asked if you want to stop the recording. Use the Navigation-Buttons up and down to select. Press the OK-Button to activate. Otherwise you can press the green Options-Button for “Yes”. or the red Options-Button for ”No”. After you quit the recording you will be asked if you want to view the recorded film. Use the Navigation-Buttons up and down to select.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.3.3 Recording by timer If no OSD menu is visible on your screen, press the TV-Button to open the service list. Press the INFO-Button. Alternatively you can press the red Options-Button to directly access the station’s EPG. Select “Channel EPG” and press the OK-Button. In this dialog the Options-Buttons are mapped differently! Press the Help-Button to get additional information about possible timer options.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Press the green Options-Button to add the selected show as hard disk recording to the timer list. Press the yellow Options-Button to add the selected show as NGrab recording to the timer list. Attention: For recording with NGrab it is neccessary, that the network and NGrab software are configured. Press the blue Options-Button to add the selected show as switch only timer to the timer list.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The DVR-Recording menu gives you the same options that were described above by pressing the Options-Buttons. Switch – Switch only timer DVR-Recording – Record to hard disk NGrab – NGrab Ethernet recording The “nothing” drop-down-menu gives you the ability to choose what should happen after the recording finished. Standby – Your Dreambox will go into Standby mode after the recording finished.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.3.4 Setting Sub Service timers using the EPG The process is exactly the same as in the chapter before. The difference however is that you choose a service that offers sub services and press the red Options-Button to access the EPG. Afterwards press the green Options-Button to add it as a DVR-Recording. The “Timer edit” menu will open up. The Sub Service menu will open up. Select the Sub Service that you want to record and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 7.4 english Watch a recording If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “File Mode” and press the OK-Button to. Alternatively you can press the TV-Button or use the Up/Down-Buttons while in TV-Mode to open up the service list. While the service list shows, press the Text-Button to get into the File-Mode as well. Use the Navigation-Buttons up and down to select.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.4.1 Delete a recording If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “File Mode” and press the OK-Button to. Alternatively you can press the TV-Button or use the Up/Down-Buttons while in TV-Mode to open up the service list. While the service list shows, press the Text-Button to get into the File-Mode as well. Use the Navigation-Buttons up and down to select.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 7.4.2 Rename a recording Please read the section Delete a recording to learn how to get into this menu. Navigate to the option “Rename” and press the OK-Button. By repeatedly pressing the buttons of the NumericKeypad you can select the letters. The yellow Options-Button toggles between capital and small letters. The Volume + Button adds a blank. The Volume – Button deletes the selected letter.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 7.5 english Timer If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Timer” and press the OK-Button to select. This is the timer list. You can see a timer event that has been entered as an example. A green checkmark in front of the timer event means that is has been successfully executed. A red cross in front of the timer event means that is has been aborted or not executed at all.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 8. english Teletext You are in the TV or Radio mode. Press the Text-Button to enter the teletext. Keep in mind that not every station transmits teletext! Teletext - regular navigation: If you are viewing any teletext page you can enter the interactive mode by pressing the OK-Button. Use the Navigation-Buttons to select a text page number and press the OK-Button to call this page.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You have the following options: Teletext - Selection: Select the "Search" option and press the OK-Button to start searching for teletext information on other services without having to leave the service that you currently are watching. After the search is finished you can use the Navigation-Buttons left and right to select the teletext of another service without having to switch services. Press the OK-Button to select the desired teletext.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 8.1 english Setting the teletext position Please read the section OSD settings to learn how to get into this menu. What is TuxText? TuxText is a Plugin (additional Software), which allows the Dreambox to decode the digital Teletext. TuxText is faster and easier to use than the regular teletext that is build in to your TV screen. This menu is used to adjust the position of the TuxText.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Press the green Options-Button to save your settings. You will be taken back to the “System” menu. 9. Sleeptimer Press the Power-Button for at least 3 seconds, select "set sleeptimer" to access this menu. This is he sleeptimer menu. Define a maximum duration of 240 minutes. Define if the Dreambox should shutdown or should go into standby mode by setting a check into one of the checkboxes beside shutdown and standby using the OK-Button. .
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10. Setup 10.1 Setting the time zone english If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System Settings” and press the OK-Button. The “System Settings” menu will open up. Navigate to the option “Time” and press the OKButton. The “Time Settings” menu will open up.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The “Time Zone Setup” menu will open up. Press the OK-Button to get open the list of time zones. . Select your desired and time zone with the Navigation-Buttons up and down. Press the OKButton to activate. The time zone list will disappear and you current selection is shown as seen in the picture above. Navigate to the option “save” and press the OKButton to save your settings. Optionally you can press the green Options-Button to save.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 10.1.1 Manual time correction Please read the section Setting the time zone to learn how to get into this menu. Navigate to the option “Time Correction” and press the OK-Button. When entering this menu, please wait a second. The Dreambox tries to receive the current time. The Transponder Time and Date will be automatically updated. If this fails, enter the new time and date manually.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.2 english Audio/Video settings If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OKButton. Navigate to the option “A/V settings” and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Use the Navigation-Buttons left and right and the OK-Button to change the values. Color format: CVBS(FBAS), RGB (Red, Green, Blue separated), SVideo (Color- and Brightness signal separated) and YPbPr (Component signal e.g. for Projectors).
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.3 english Keyboard If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System Settings” and press the OK-Button. Navigate to the option “Keyboard Setup” and press the OK-Button. Press the OK-Button to open the drop down menu and select your desired keyboard layout. Press the green Options-Button to save your settings.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.4 english OSD settings If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System Settings” and press the OK-Button. Navigate to the option “OSD settings” and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Using the Navigation-Buttons left and right you can change the transparency, brightness and contrast settings of the OSD (On Screen Display). Alpha: The “Alpha” option controls how strong you will see the TV picture through the OSD menu. Brightness: Changes the brightness of the OSD menu. Contrast: Changes the contrast of the OSD menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.5 english Language If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System Settings” and press the OK-Button. The “System Settings” menu will open up. Navigate to the option “OSD Language” and press the OK-Button. The “OSD Language” menu will open up.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.6 english Skin Setup Please read the section OSD settings to learn how to get into this menu. A skin changes the appearance of the OSD. Choose the skin to your liking and press the OKButton to select it. The standard skin is Screwed Stone. See section Available skins for a complete list of available skins. To completely activate a skin Enigma has to be restarted. Make your choice and press the green OptionsButton to activate the skin.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 10.6.1 Available Skins Bluenigma BIG Silver Metal Neutrino-style Screwed Stone Carbon BlueQT Simple and Stylish The skin Simple and Stylish 16:9 looks just like the Simple and Stylish skin. It is only optimized for a 16:9 TV screen.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.7 english Expert setup If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Expert Setup” and press the OK-Button. 1GB: You can set the filesize for splitting recordings here. Infobar timeout 6 sec.: Set the desired time after which you want the Infobar to disappear.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Hide error windows: If enabled no more error messages, i.e.: service not found, will be shown. Automatically show Infobar: If enabled the Infobar will be shown every time a new show starts. Show remaining Time: If enabled the remaining time rather than the total time of the running show will be displayed in the Infobar. Use http authentification: If disabled you will no more need a username and password to access the web interface of your Dreambox.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.8 english Network Please read the section Expert setup to learn how to get into this menu. Navigate to the option “Communication setup” and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Use the Navigation-Buttons and the Numeric Keypad to enter or change the values. IP: Enter the IP address here. DHCP: If enabled your Dreambox will get its IP from a DHCP server. Disable this option to set a static IP address. Netmask: Enter the subnet mask (Usually 255.255.255.0). Attention: If you are using a DHCP server in your LAN, configure the DHCP server so it does not assign the IP address used by the Dreambox.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Pressing the blue Options-Button in the “Communication setup” menu will take you to the “Mount Manager” menu. You can setup up to eight different configurations to connect your Dreambox to shared folders on your PC. Right now only NFS sharing is supported. IP: IP address of the NFS server you want to access. NFS: Right now only the option NFS is available. Once more share types are supported you can select the type in this drop down menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 10.9 english NGrab - Streaming Setup Please read the section Expert setup to learn how to get into this menu. In this menu you can set the IP address and port number of the NGrab server. The server can be running on any workstation or server in the LAN or WAN. Navigate to the option “NGrab-Streaming” and press the OK-Button. Srv IP: Enter the IP address of the server or workstation running the NGrab software.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 10.10 Remote control setup Please read the section Expert setup to learn how to get into this menu. Navigate to the option “Remote control” and press the OK-Button. This Menu is used to customize the remote control for your needs. Use the Navigation-Buttons left or right to adjust the Repeat Rate and the Repeat Delay. Press the green Options-Button to save your settings. You will be taken back to the “Expert” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 10.11 Reset to factory defaults Please read the section Expert setup to learn how to get into this menu. Navigate to the option “Remote control” and press the OK-Button. Follow the instructions on the screen and pick your choice.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 11. Service searching 11.1 DVB-T Tuner configuration english 11.1.1 Signal strength (Adjusting your antenna) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Signalfind” and press the OK-Button. Press the OK-Button to select a transponder.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.1.2 Disable 5V If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Disable 5V”. Press the OK-Button to set a check behind this option if you use a passive antenna.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.1.3 Automatic transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Automatic Transponder Scan” and press the OK-Button. Select the region you live in the drop down menu and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You now should see that a valid transponder has been found and the checkboxes in front of “LOCK” and “SYNC” should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) only Free: If you check the checkbox in front of the “only Free” option, your Dreambox will search on for FTA (nonencrypted) services. Press the green Options-Button to start searching.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.1.4 Manual Transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Manual Transponder Scan” and press the OK-Button. Enter the desired frequency with the Numeric Keypad on your remote control.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 11.2 english DVB-C Tuner configuration 11.2.1 Automatic transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Automatic Transponder Scan” and press the OK-Button. Select your cable provider in the drop down menu and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You now should see that a valid transponder has been found and the checkboxes in front of “LOCK” and “SYNC” should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) Only free: If you check the checkbox in front of the “Only free” option, your Dreambox will search on for FTA (nonencrypted) services. Press the green Options-Button to start searching.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.2.2 Manual transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Manual Transponder Scan” and press the OK-Button. Enter the desired frequency with the Numeric Keypad on your remote control.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 11.3 english DVB-S Tuner configuration 11.3.1 Satfinder (Adjusting your dish) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Satfind” and press the OKButton. Select the satellite and transponder in the drop down menu and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.2 Satellite configuration If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Satellite Configuration” and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.3 one single satellite – direct connection Use this type of configuration if you want to receive a single satellite with a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB. Please read the section Satellite configuration to learn how to get into this menu. The “Satellite Configuration” menu will open up. Choose the upper drop down menu and press the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.4 2 satellites via Toneburst Use this type of configuration if you want to receive two satellites from one LNB each. It does not matter if you use one or two dishes to achieve this. Connect the two coax cables form the two LNBs to a so-called Toneburst switch and connect the coax cable from the Toneburst switch to your Dreambox. Please read the section Satellite configuration to learn how to get into this menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.5 2 satellites via 22KHz (Highband only) Use this type of configuration if you want to receive two satellites from one LNB each. It does not matter if you use one or two dishes to achieve this. Connect the two coax cables form the two LNBs to a so-called 22kHz switch and connect the coax cable from the Toneburst switch to your Dreambox. Please read the section Satellite configuration to learn how to get into this menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.6 2 satellites via DiSEqC A/B Use this type of configuration if you want to receive two satellites from one Twin Universal or Quad Universal LNB. It does not matter if you use one or two dishes to achieve this. In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to the satellite receivers in your household. Please read the section Satellite configuration to learn how to get into this menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.7 4 satellites via DiSEqC OPT A/B Use this type of configuration if you want to receive four satellites from one Twin Universal or Quad Universal LNB. It does not matter if you use one or two dishes to achieve this. In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to the satellite receivers in your household.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.8 Many satellites via DiSEqC Rotor Use this type of configuration if you want to receive many satellites with a DiSEqC 1.2 Rotor or Stab from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB. Please read the section Satellite configuration to learn how to get into this menu. Choose the upper drop down menu and press the OK-Button. A list of all possible configurations will show up.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Hint: If you do not want to change the satellite position list before hand, just select the option “Single satellite – direct connection” and choose “Yes” in case you are prompted the message on the left. . You will now see the configuration menu depicted on the right. Choose “Non standard – user defined configuration” in the upper drop down menu. Press the OKButton. For now you will only see one satellite in the list.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english As you can see, the „DiSEqC - Mode“ is not set yet. Please leave the “Toneburst” mode as it is. Press the number “2” on your Numeric Keypad and select the “DiSEqC – Mode” Version 1.2. To save the settings press the OK-Button. The menu will change and reveal additional options now. There is no need to change anything here. Press the green Options-Button to save the settings. You are taken back to the “Satellite configuration” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.9 Motor Setup Use this type of configuration if you want to receive many satellites with a Rotor or Stab from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB. Please read the section Satellite configuration to learn how to get into this menu. Choose the drop down menu „Motor Setup“ and press the OK-Button. Refer to the Rotors Manual for correct values degrees/second. Visit the Website http://www.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Take the list of preset satellite positions of your rotor, which can usually be found in the rotor’s manual and add each satellite that you want to receive in the list in the left. i.e.: Number 1 in the rotor is Hotbird 13° Ost You will have to enter a 1 in the “Number in rotor” field and a 130 in the “Orbital position” field. . For a better understanding please take a look at the Example table for the DiSEqC 1.2 Rotor (SG2100).
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.10 Automatic transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Automatic Transponder Scan” and press the OK-Button. This option is primarily used for only scanning a single satellite in your list.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You now should see that a valid transponder has been found and the checkboxes in front of “LOCK” and “SYNC” should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) only Free: If you check the checkbox in front of the “only Free” option, your Dreambox will search on for FTA (nonencrypted) services.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english You will now be prompted if you want to scan another satellite. Press the green Options-Button if that is the case and you have setup another satellite in the satellite list. Press the red Options-Button to end the scan. You are taken back to the “Service searching” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.11 Automatic multisat scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Automatic Multisat Scan” and press the OK-Button. This option will scan all satellites in your satellite list without asking you if you want to scan any other satellites.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to “all” will scan for all available services no matter if they are free or encrypted. . Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to “only free” will scan for all available services that are not encrypted. Pressing the OK-Button will toggle between the available scan options.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The menu for the first scanned satellite is depicted on the left. The menu for the second scanned satellite is depicted on the left. Once your Dreambox is done searching you will see this menu on the right. A brief summary of the search is shown. Press the OK-Button to close this menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The System will now ask you, if you want to scan any other transponders. Press the red Options-Button to quit the transponder scan. You are taken back to the “Service searching” menu.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.12 Manual transponder scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Manual Transponder Scan” and press the OK-Button. First choose the satellite you want to scan on with the OK-Button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english 11.3.13 Edit a transponder If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Transponder Edit” and press the OK-Button. This menu will let you edit the satellite and transponder lists that are used for the service scan.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Follow the instructions in this menu. Press the Navigation-Buttons to reach the desired option and use the OK-Button to change them. . Network search: The NIT holds the Information about the Satellites and the TV/Radio- Programs. (NIT = Network Information Table) Extended network search: Set a check to scan the NIT from other Transponders. Use BAT: Bouquet Tables of the Provider will be used, if available.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english Through this menu you can a transponder to a satellite. Using the Numeric Keypad of your remote control enter the transponder frequency and symbol rate. Press the green Options-Button to save your settings. After you have made your changes to the transponder and satellite list, press the Exit-Button to leave the menu. You will be prompted if you want to save your changes. Press the green Options-Button to save your changes.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 12. Systeminformation 12.1 Service english If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Information” and press the OK-Button to select. Navigate to the option “Stream information” and press the OK-Button. Use the Navigation-Buttons left and right to switch between the three windows. Pressing the Exit-Button will close this window.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 12.2 english About (Hard- and Software) Please read the section Information – Streaminformation to learn how to get into this menu. Navigate to the option “About…” and press the OKButton. This window summarizes all relevant information about the system. Press the green Options-Button to close the window.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 13. english Software update How do you update the software of your Dreambox DM600 PVR? Prerequistes: - PC with Windows operating system DreamUp Software (most recent version online: http://www.dream-multimedia-tv.de) 1 serial null modem cable 1 network cable Disconnect the power to your Dreambox first. Run the DreamUp software on your computer. Select COM1 or COM2 according to the port to which you have connected the null modem cable.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The flash loader is now transferred to your Dreambox. After the flash loaded is transferred press the “Flash” button. Select the Image and press the “Open” button.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR english The new software is now transferred to your Dreambox. If the process was successful you will get a „Box was flashed successfully“ dialog. Click on “OK” and afterwards on the “Exit” button. Disconnect and reconnect the power of your Dreambox.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 14. english Troubleshooting Problem No audio, no video Possible cause Faulty wiring Check wiring and connections Faulty LNB Exchange LNB Wrong Tuner setting Review settings (see 12.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 15. english TV-Mode setup A four digit device code is selected from the device list and entered into the remote control. The most recent device list can be found on our website. SHIFT / SETUP-Button TV-Mode-Button Numeric-Keypad 15.1 Programming the remote control - Press the TV-Mode-Button once. - Press the SHIFT/Setup-Button for 3 seconds, the TV-Mode-Button will flash twice.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 15.2 english Device list A.R.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Domland Drean DTS Dual Dumont Dux Dynatron Elbe Elcit Elekta Elin Elite Elman Elta Emerson Emperor Erres Etron Euro-Feel Europa Europhon Expert Exquisit Fenner Ferguson Fidelity Filsai Finlandia Finlux Firstline Fisher Flint FNR Formenti Fortress Fraba Friac Frontech Fujitsu Fujitsu General Funai Galaxi Galaxis GBC GE Geant Casino GEC Geloso General IInterfunk Internal Intervision Irradio Isukai ITC ITS ITT ITV 0424 0067 0039 0379 0247 0373 0289 0366 0549
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Jea JEC JVC Kaisui Kamp Kapsch Karcher KB Aristocrat Kendo Kennedy Kingsley Kneissel Kolster Konka Kontakt Korpel Korting Kosmos Kotron Kraking Kyoshu Kyoto Lemair Lenco Lenoir Lesa Leyco LG Liesenkotter Lifetec Lloyd’s Loewe Logik Logix Luma Lumatron Lux May Luxor Madison Magnadyne Magnafon Mandor Manesth Manhattan Marantz Marelli Mark Masuda Osume Otto Versand Pael Palladium Palsonic Panama Panasonic Panavision Pathe Cinema Pathe Marconi 066 065 0683 00
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Pausa Perdio Perfekt Pershin Philco Philharmonic Philips Phoenix Phonola Pioneer Pionier Plantron Playsonic Poppy Portland Prandoni-Prince Precision Prima Prinz Profex Proline Prosonic Protech Provision Pye Pymi Quadra Vision Quasar Quelle Questa R-Line Radialva Radiola Radiomarelli RadioShack Radiotone Rank RCA Recor Rediffusion Redstar Starlite Stenway Stern Strato Sunkai Sunstar Sunwood Superla Supertech Supra Susumu Sutron Swissline Sydney Sytong Tandbe
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Tech Line Technema Technisat Tedelex Teleavia Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Televiso Temco Tempest Tensai Tenson Tevion Texet Thomson Thorn Tokai Tokyo Tomashi Toshiba Towada Trans Continens Trident Tristar Triumph Uher Ultravox 0067 0698 0350 0685 0247 0139 0531 0317 0226 0429 0235 0363 0520 0067 0193 0248 0247 0289 0424 0139 0531 0528 0501 0429 0317 0104 0114 0131 0365 0292 0336 0373 0226
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 16. Technical data • 250 MHz IBM PowerPC Processor (350 MIPS) • Linux Operating System, Open Source • DreamCrypt CA integrated • 1 x Smartcard-Reader • MPEG2 Hardware decoding (DVB compliant) • V.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR Serial Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Ethernet: 100 Mbit compatible, bi-directional interface Function Update of Firmware and Preprogramming Input voltage: 12V power converter 110-230V / 50-60Hz AC +/- 15% Physical specification: Ambient Temperature +15°C...
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 17. Contact & support information Headquarter & Distribution: Dream-Multimedia GmbH Pierbusch 24-26 44536 Lünen Germany Dealer’s Hotline: (Dealers only) Tel.: +49 (0)180 - 3 85 85 90 112 (0,09€/min.) Fax: +49 (0)180 - 3 85 85 90 777 (0,09€/min.) You can reach the dealer’s hotline from : Mo - Fr. 09:00 am - 03:00 pm Technical Hotline: Tel.: +49 (0)180 - 3 85 85 90 110 (0,09€/min.) Fax: +49 (0)180 - 3 85 85 90 111 (0,09€/min.
U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR 18. english Copyright Notes © Dream-Multimedia 2007. All rights reserved. This product contains files that are distributed under different licenses, especially an Open Source License, the GNU General Public License. You can find details about this License on the next three pages. Additional notes about the source code and patches under The GPL license can be found on the internet under this link: http://www.dream-multimedia-tv.de/deutsch/downloads.
18.1 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.