dreambox DM7020 HD User Manual Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB) with optional digital recording capability. HDTV PNP DVB-S2 Tuner PNP DVB-C/T Hybrid Tuner Ethernet-Port 10/100 Mbit contrasty OLED-Display 2x Common Interface 2x Smartcard-Reader Dreamcrypt™ eSATA-Connector 3x USB 2.
Foreword Dear customer, Congratulations on your new Dreambox DM7020 HD. This manual should assist you to connect your dreambox, learning the basic operation and getting to know the additional multiple features. Please note that the range of functions expands continiously by new software updates. If you updated the software of your dreambox or found some failure in the manual, please check if a new version is available in the download section of our website www.dreambox.de.
Contents 1 Before initial operation of the receiver 1 1.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Packaging contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3.1 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3.
.4 Remove a service from favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.5 Moving a service to favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.6 Adding a marker to favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.7 Alternative services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.8 Parental control . . . . . . . . . . . . . . . . . . . . . .
7.2 DVB-C Tuner configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 7.2.1 7.3 Tuner B setup (DVB-C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 DVB-T Tuner-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 7.3.1 Tuner B setup (DVB-T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 7.4 Automatic scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Before initial operation of the receiver 1.1 Safety instructions Please read the safety instructions completely and carefully, before using the Dreambox. The Manufacturer takes no responsibility for damages as a result of incorrect handling of the Dreambox. • Allow enough space around the Dreambox for sufficient ventilation. • Do not cover the top of the Dreambox and allow enough space to other devices.
Additional safety instructions • (Dis-)Connecting to a LNB: Turn the Dreambox off before you connect or disconnect a cable coming from or going to a LNB. • Connection to the cable wall box or terrestrial antenna: Before connecting or disconnecting your antenna cable to the Dreambox please turn it off. • Connecting to a TV: Before connecting or disconnecting your Dreambox to/from a TV please turn it off.
Disposal instructions The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
1.3 Views 1.3.1 Front view IR sensor Channel up/down Status LED 2 x CI-slot USB 2.0 port 2 x Smartcard-Reader Dreamcrypt™ OLED display Standby button 2 x CI-slot You can insert a CI-Module of your choice in one of the CI-Slots. In order to remove the ci module, use the eject button on the right side of the CI-Slot. 2 x Smartcard-Reader Dreamcrypt™ Insert your Dreamcrypt™ Smartcard with the golden chip facing down and forward into one of the two Smartcard reader slots.
1.3.2 Rear view S/PDIF optical audio eSATA connector Dream-Multimedia GmbH Video out OUT Power OFF/ON L 230 /110V IN 230V ~ 110/230V / 50/60Hz +/- 15% 13/18V= / LNB IN Powerswitch Network interface Composite video output Dream-Multimedia GmbH Service connector HDMI output R eSATA Service Power connector Scart TV output Voltage selector 230V / 110V (Cinch) Scart TV Audio out Analog audio terminal S/PDIF optical HDMI Ethernet USB Tuner B Tuner A 2 x USB 2.
Network interface The Communication Port is an Ethernet port. It is used to communicate with your Dreambox via HTTP, FTP, NFS, Telnet, SSH and Samba to access your recorded movies, to upload channel lists, etc. This port is also used to update the operating system of your Dreambox. Please use a regular patch cable to connect your Dreambox to your LAN. 2 x USB 2.0 port The USB 2.0 Port is designed for devices that support the USB 2.0 standard.
1.
Battery charge indicator indicates the status of the battery voltage. Standby-Button The Standby-Button switches your Dreambox on and off. (see Chapter 3.1 Turning your Dreambox on and off on page 17) DREAM-Mode-Button The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will shortly light up once your press the button. HELP-Button Pressing the HELP-Button shows the help menu.
Mute-Button Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pressing it again or pressing one of the Volume +/- Buttons brings back the audio. The Mute-Button deletes a character during text input. Bouquet +/- Buttons Pressing the Bouquet +/- Buttons will jump back and forth between the bouquets. Rewind-Button Use the Rewind-Button to rewind during playback of a recording.
Chapter 2 Start-up 2.1 Connecting Before using the Dreambox, please read the safety instructions under Chapter 1.1 Safety instructions on page 1. In the following is described how to connect the dreambox to a Satellite-dish, a cable connection, a terrestrial connection, an a/v receiver, a tv-device and a network. 2.1.1 Satellite Dish (DVB-S/S2) Connect the (LNB) with a suitable coax cable to the LNB-Input of your Dreambox.
2.1.4 A/V Receiver Connection via optical fiber cable If your a/v receiver (amplifier) has a suitable optcial S/PDIF Input, connect the connection jack S/PDIF OPTICAL at the Dreambox with an optical fiber cable (toslink) with the optcial S/PDIF Input of your Video out OUT L 230 /110V IN 230V ~ 110/230V / 50/60Hz +/- 15% 13/18V= / LNB IN Dream-Multimedia GmbH Power OFF/ON Dream-Multimedia GmbH amplifier.
Connection via HDMI cable Use an hdmi-cable to connect the hdmi-out of your dreambox to an hdmi-input of the a/v receiver. After that take a second hdmi-cable for connecting the hdmi-out of your a/v receiver to the hdmi-input of the Video out OUT L 230 /110V IN 13/18V= / LNB IN Dream-Multimedia GmbH Power OFF/ON Dream-Multimedia GmbH tv-device.
2.1.5 Television HDMI Connect the dreambox with the hdmi or scart-cable mit dem TV-input of your television. At least use the hdmi-interface for getting the best picture quality (through digital transmission). You can use the supplied HDMI cable for connecting the dreambox with the hdmi-input of your Video out OUT L 230 /110V IN 230V ~ 110/230V / 50/60Hz +/- 15% 13/18V= / LNB IN Dream-Multimedia GmbH Power OFF/ON Dream-Multimedia GmbH television.
2.1.
2.2 Turning the device on 1. Place the batteries inside the battery compartment of the remote control keeping in mind the right polarity. 2. Ensure that you have the voltage selector switch (230V/110V)at the correct position, otherwise it can cause severe damage! 3. Plug in the power cable into the Dreambox and then into a 110V/60Hz or 230V/50Hz power socket. 4. Now turn on your dreambox.
Tuner Detailed information about the tuner setup can be found in chapter 7.1 DVB-S2 Tuner-Configuration on page 58. Default services list/Service scan Depending on your tuner configuration in the previous step, you might be offered to install default services lists. Otherwise you will be asked to perform a service scan. Detailed information about the service scan can be found in Chapter 7.4 Automatic scan on page 66. Parental Control Parental control makes it possible to lock selected channels.
Chapter 3 Basic operation 3.1 Turning your Dreambox on and off Your Dreambox has a standby mode and a so-called deep-standby mode. Both functions differ in their power consumption and the time which is needed until the box has booted. • Standby about 1 Second (higher power consumption) • Deep-Standby about 1-2 Minutes (less power consumption) Standby To put your Dreambox into Standby-Mode either press the Standby-Button on your remote control or directly on your Dreambox.
This is the Standby / Restart-Menu. With the Navigation-Buttons (NH) choose the desired option and press the OK-Button. 3.2 Service selection Pressing the Navigation-Buttons (JI) on your Dreambox remote control will take you to the previous or next service. Pressing the 0 on the Numeric-Keypad will enable you to skip back and forth between the two most recently watched services.
3.4 Controlling the volume The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing - will turn it down. Pressing the MUTE-Button mutes the volume. A crossed speaker symbol will appear on the screen. 3.5 Changing the audio track Pressing the AUDIO-Button in TV or Radio Mode. Use the Navigation-Buttons (NH) to move to desired audio track. Press the OK-Button to select. The contents of this menu will vary from service to service.
3.8 Subtitles Follow this steps: 1. In TV- or Radio Mode press the AUDIO-Button. 2. By pressing the yellow Options-Button a list with the available subtitles will show up. 3. With the Navigation-Buttons (NH) select a desired subtitle and press the OK-Button to activate. The screenshot on the left shows you an example of how a subtitle looks. Note: Keep in mind that not every station offers subtitles. If no subtitles are available, the subtitle list will stay empty.
3.9 Infobar The Infobar appears when switching a channel and shows all necessary Information about the selected service. By pressing the OK-Button you can open the Infobar if needed! Active tuner Progress bar Signal level Error rate Current show Channel name Next show Remaining time Is highlighted yellow as soon as a show is broadcasted encrypted. Is highlighted yellow as soon as a show is broadcasted in Dolby Digital. Is highlighted yellow as soon as a show is broadcasted in 16:9 aspect ratio.
3.10 Electronic Program Guide - EPG The Electronic Program Guide (EPG) shows information regarding the current tv service (similar to a TV guide). By pressing the INFO-Button in TV-Mode you are supplied with detailed information about the current show and by pressing the Navigationbutton (I) afterwards about the next show. Pressing the yellow Options-Button activates the “Channel-EPG” (see Chapter 3.10 Single-EPG on page 23) and pressing the blue Options-Button activates the “Multi-EPG” (see Chapter 3.
Single-EPG In this view you are supplied with detailed information about the currently selected channel’s programming. Follow this steps: 1. Press the INFO-Button. 2. Press the yellow Options-Button for getting the “Single-EPG” view. You can also access this view by pressing: 1. Press and hold the INFO-Button for about 2 seconds. With the Navigation-Buttons (NH) choose the option “show single service-epg’ and press the OK-Button. or 2. Press the Navigation-Buttons (NH) to open the services list.
Multi-EPG Follow this steps: 1. Press the Info-Button. 2. Press the blue Options-Button for switching to “Multi-EPG” view. Use the blue and yellow Options-Buttons to switch between the now, next and more views. Pressing the green Options-Button will give you the possibility to automatically copy the start and end time of the selected show into a recording timer. If you have set the “Multi bouquets” option to “yes” (see Chapter6.2 Customize on page 48) a selection of your bouquets will appear.
Time/Date Input Press the Menu-Button in the Multi-EPG view. A window will appear where you can enter a time and date. After you have entered the desired time and date press the OK-Button to activate you selection. Graphical Multi-EPG You have another option to view the EPG of different services and successive shows. The Graphical MultiEPG displays the EPG overview of the upcoming hours (can be set to 1-5 hours with the Buttons 1-5 on the Numeric-Keypad) for the chosen bouquet.
Time/Date Input Press the Menu-Button in the Multi-EPG view. A window will appear where you can enter a time and date. After you have entered the desired time and date press the OK-Button to activate your selection. 3.11 Teletext (Videotext) Press the Text-Button to enter the Teletext. With the EXIT-Button you can leave teletext.
the search is finished you can use the Navigation-Buttons (JI) to select the Teletext of another service without having to switch services. Press the OK-Button to select the desired Teletext. This option is only available if more than one service on the current satellite transponder actually transmits Teletext information. If this is not the case you cannot make a selection. Screen format: Standard mode 16:9 = on/off Enabling this shows the TuxText in 16:9 Aspect Ratio.
3.12 Picture-in-Picture mode (PiP) The Dreambox has a so called PiP-Function. With PiP you can display a small TV picture on top of the main big TV picture. Double press the blue Options-Button to activate Picture-in-Picture mode. activated Picture-in-Picture mode The main TV picture is now additionally displayed as a small PiP in the upper right corner of your screen and the last watched service is displayed in the main big TV picture. In PiP mode you will always hear the sound from the main TV picture.
3.13 Sleep timer Using the sleep timer you can put your Dreambox into standby or turn it off after a predeterminedamount of time. Follow this steps: 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Standby / Restart” and press the OKButton. 3. With the Navigation-Buttons (NH) choose the option “Sleep timer” and press the OK-Button.
Chapter 4 Edit the channellist What is a bouquet? A bouquet can be thought of something like a folder. Every channel equals a page in this folder and the pages are sorted into categories. This way you can create a bouquet called “Kids”, for example, under which you “file” all children’s stations. Another example would be to create a bouquet called “Sports” where you put all sports channels. This way you can create several topic related bouquets.
4.2 Add a service to favorites If you want to add a service to your Favorites-view you can choose from services in the All-, Satellitesand Provider-views. You can switch views by pressing the red, green, yellow and blue OptionsButtons. At this point we only describe the process from the All-Bouquet since it is the same for the others. 1. Press the Navigation-Buttons (NH) to open the channellist. 2. Press the red Options-Button to switch to the “All” view. 3.
4.4 Remove a service from favorites 1. Press the Navigation-Buttons (NH) to open the channellist. 2. With the Navigation-Buttons (NH) choose the channel you want to delete. 3. By pressing the MENU-Button the “Channellist menu” will open up. 4. With the Navigation-Buttons (NH) choose the option “remove service” and press the OK-Button. The selected service will be deleted from your favorites list. 4.5 Moving a service to favorites 1. Press the Navigation-Buttons (NH) to open the channellist. 2.
6. Press the OK-Button, to add the marker to your favorites list. If you have added two markers use the Arrow-Left and Arrow-Right-Buttons to jump between those two markers. 4.7 Alternative services Incase you are using two different types of tuners in your Dreambox, for example a DVB-S and a DVB-T tuner, you can link services that you receive on both tuners in the “alternative services” list. Every services resides on a so called transponder. A transponder contains a number of services.
How to link services will be explained in the following steps. 1. Press the Navigation-Buttons (NH) to open the channellist. 2. With the Navigation-Buttons (NH) choose the service for which you want to add an Alternative. 3. By pressing the MENU-Button the “Channellist menu” will open up. 4. With the Navigation-Buttons (NH) choose the option “Add alternatives” and press the OKButton. The “All view” opens up. 5.
In this example we decided to lock the service called “ProSieben”. Accordingly we selected the “P” as the first letter. The Parental control services Editor will open up. All services beginning with the letter “P” are shown. 5. With the Navigation-Buttons (NH) choose the service “ProSieben” and press the OK-Button. A symbolized padlock will appear in front of the channel letting you know that it can only be watched when the right pincode is entered.
Chapter 5 Hard disk operation Hint: When using an external eSATA HDD it must have an own power supply!!! 5.1 Installation-Guide This capter describes how to install a 3,5“ SATA Hard disk in your Dreambox DM7020 HD. Please always adhere to ESD (Electrostatic Discharge) regulations when handling electronic devices. • Make sure that you are grounded. • Do not open the device in your living room or in any other rooms with carpeting or any other flooring that can carry an electrostatic charge.
Opening the device 1. Unscrew the screw(s) on the left and right side of your Dreambox. Remove screw(s) on the left and right side Video out OUT Power OFF/ON L 230 /110V IN 230V ~ 110/230V / 50/60Hz +/- 15% 13/18V= / LNB IN Dream-Multimedia GmbH Dream-Multimedia GmbH 2. Remove the screw(s) on the rear panel, marked on the picture. R eSATA Service Scart TV Audio out S/PDIF optical HDMI Ethernet USB Tuner B Tuner A Remove marked screw(s) on the rear panel 3.
Installation of a 3,5” SATA Hard disk 1. Place the hard disk into the hard disk cage, ensure that the connection port is pointing towards the back of the dreambox. Place the hard disk carefully into the plug of the hard disk cage. Placing hdd to hard disk cage (Fig. 1) Placing hdd to hard disk cage (Fig.
Placing hdd to hard disk cage (Fig. 3) 2. Now you need a Phillips-tip screwdriver and four screws for mounting the hdd. Tighten the hard disk with the four screws on the left and right side of the hard disk cage (see figure 4). Placing hdd to hard disk cage (Fig. 4) 3. Reassamble your Dreambox by following the guide (see Chapter 5.1 Opening the device on page 37) backwards. 4. Reattach all necessary cables to your Dreambox making sure that you connect the power cord as last.
5.2 Management 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “System” and press the OK-Button. 4. With the Navigation-Buttons (NH) choose the option “Harddisk” and press the OK-Button. 5. With the Navigation-Buttons (NH) choose the option “Harddisk setup” and press the OK-Button.
5.3 Recording 5.3.1 Instant recording Press the Record-Button. You have five available options. 1. Add recording (indefinitely) 2. Add recording (stop after current event) 3. Add recording (enter recording duration) 4. Add recording (enter recording endtime) 5. Don’t record Use the up/down-Buttons to navigate to you desired selection and press the OK-Button to select. A ongoing recording is indicated by a flashing symbol in the Infobar (see Chapter 3.9 Infobar on page 21).
Manual programming 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Timer” and press the OK-Button. 3. Press the green Options-Button to add a new timer. Add Timer You can choose between two different timer types. “Record” to record the desired show or “Zap” to automatically switch to the service. As repeat type you can choose between “once” and “repeated”.
Programming via EPG Change into on of the EPG views in chapter (as described in Chapter 3.10 Electronic Program Guide EPG on page 22). By pressing the green Options-Button you have the option to automatically add the selected show with it’s start and end time as a timer. All other options are the same as in the manually added timer. Press the green Options-Button to save the timer. You will be taken to the “Timer Editor” menu. Choose service which you want to record fill text Timereditor 1.
The status of a timer is shown on the right side: waiting means: still coming up recording means: recording right now done means: recording finished the red X indicates that a timer was deactivated If you pressed the blue Options-Button you will be asked if you really want to delete the finished timer. Use the Navigation-Buttons (NH) to select. Press the OK-Button to activate.
List of recordings Fast Forward-Button = Fast Forward Keep in mind that you have to be in the PVR-Mode to use these options. You can check this by pressing the OK-Button. The Infobar will reveal and should show the depicted control symbols. If they are not shown you simply have to press the PVR-Button. The infobar mustn’t be shown for using the playback functions. For leaving playback mode follow this steps: 1. Press the STOPP-Button. 2. You will be asked if you want to stop the replay of the recording.
5.5 Setting a marker (Bookmarks) Fast forward to the point where you want to add a marker and press the 0 on the Numeric-Keypad. This will set a marker at the desired point. Infobar Movieplayer with Markers The red dashes in the timeline correlate to a marker. Skip to a marker You can directly skip to a previously set marker during playback. Press the Arrow-Left-Button to skip to the previous marker and press the Arrow-Right-Button to skip to the next marker.
List styles You have the choice between different list styles: List style default List style default with extended description List style compact List style compact with desciption 47 List style single line
Chapter 6 Setup 6.1 Language 1. If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “System” and press the OK-Button. 4. With the Navigation-Buttons (NH) choose the option “Language” and press the OK-Button. 5. With the Navigation-Buttons (NH) choose your desired language and press the OK-Button in order to activate. 6.
Infobar timeout: Set the desired time after which you want the Infobar to disappear. You can choose between one and ten seconds or “no timeout”. 6.2.2 Intermediate mode: These settings supplement the settings in simple mode. Recordings always have priority: If this option is set to “Yes” your Dreambox will automatically switch to the service which is supposed to be recorded incase there is a conflict with an existing timer.
Video output This option selects to which output the video signal will be sent to. HDMI If you have connected your TV to the HDMI output of your Dreambox set the “Output type” option to “HDMI”. Scart If you have connected your TV to the Scart output of your Dreambox set the “Output type” option to “Scart”.
Mode Scart Select the standard supported by your TV screen. This is usually either PAL or NTSC. If you own a TV screen which supports both modes you can also select the Multi option. Your TV screen will automatically switch depending on the input signal. These options are only available ifthe output type is set to “Scart”. Aspect ratio Automatic (Standard) 4:3 shows will be shown as 4:3 and 16:9 shows will be shown as 16:9.
Standby 1. With the Navigation-Buttons (NH) choose the option “Standby”. 2. With the Navigation-Buttons (JI) choose the brightness of the OLED-Display for standby mode. 6.6 Network 6.6.1 Connection via network cable Adapter-Settings 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “System” and press the OK-Button. 4.
Network test The network test will assist you in finding possible sources of error in your network configuration. Press the green Options-Button to start the test or to repeat it. Press the yellow Options-Button to abort the test. Once the test has finished you can get additional information and help to every subitem of the test. Use the Navigation-Buttons (NH) to select an item and press the OK-Button.
found Wireless Networks WLAN Settings Manual Select the “Adapter settings” option and press the OK-Button. A window for the adapter settinsg will open. Use the Navigation-Buttons and the Numeric-Keypad to change the settings. Adapter settings Use interface This options toggles the integrated ethernet interface on and off. Use DHCP If set to “yes” your Dreambox will get its IP from a DHCP server. If you are using a router to access the internet you usually have a DHCP server.
Virtual Keyboard Virtual Keyboard Use the Navigation-Buttons (NHJI) to select a character and press the OK-Button to enter it into the text field. Once you have enterred the complete encryption key press the green Options-Button so save the key or the red Options-Button to discard it. Namserver settings, Network test, Restart network, Network wizard For further information on these options refer to chapter 6.6.1 Connection via network cable on page 52. 6.
Reset This options resets your CI-Module. This function is needed if you are experiencing trouble with one of your encrypted services. Init This option initializes an inserted Smartcard. It is recommended to inset the CI-Module with the Smartcard already in it. No module found No CI-Module is inserted into the slot. If you have inserted one the name and firmware version will show. Navigate to this option and press the OK-Button to get to the extended options of the inserted CIModule.
6.9 Factory reset 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “Factory Reset” and press the OK-Button. You will be asked if you really want to reset all your settings to the factory defaults. If you select “yes” all your settings and bouquets will be lost. Afterwards your Dreambox will be restarted automatically.
Chapter 7 Service searching In this chapter you will learn how to setup the tunerconfiguration for the reception with a satellite-dish (DVB-S/S2), via cable television (DVB-C) or via digital terrestrial television (DVB-T) in your dreambox and how to perform a service scan. 7.1 DVB-S2 Tuner-Configuration 7.1.1 Single satellite – direct connection Use this type of configuration if you want to receive a single satellite with a Single Universal LNB.
7. With the Navigation-Buttons (JI) choose the option “Single”. 8. With the Navigation-Buttons (NH) choose the option“Satellite”. 9. With the Navigation-Buttons (JI) choose the desired Satellite. 10. Press the OK-Button to save this settings. You are taken back to the “Choose tuner” menu. If you have trouble with “Tune failed” messages please set the “Send DiSEqC only on sattelite change” to “yes”. 7.1.
9. With the Navigation-Buttons (JI) choose the desired Satellite. 10. With the Navigation-Buttons (NH) choose the option “Port B”. 11. With the Navigation-Buttons (JI) choose the desired Satellite. 12. Press the OK-Button to save this settings. Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again. 7.1.
9. With the Navigation-Buttons (JI) choose the desired Satellite. 10. With the Navigation-Buttons (NH) choose the option “Port B”. 11. With the Navigation-Buttons (JI) choose the desired Satellite. 12. Press the OK-Button to save this settings. Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again.
7. With the Navigation-Buttons (JI) choose the option “DiSEqC A/B/C/D”. 8. With the Navigation-Buttons (NH) choose the option “Port A”. 9. With the Navigation-Buttons (JI) choose the desired Satellite. 10. With the Navigation-Buttons (NH) choose the option “Port B”. 11. With the Navigation-Buttons (JI) choose the desired Satellite. 12. WäWith the Navigation-Buttons (NH) choose the option “Port C”. 13. With the Navigation-Buttons (JI) choose the desired Satellite. 14.
2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OKButton. 4. With the Navigation-Buttons (NH) choose the option “Tuner configuration” and press the OKButton. 5. With the Navigation-Buttons (NH) choose the option “DVB-S2 Tuner” and press the OK-Button. 6. With the Navigation-Buttons (NH) choose the option “Mode”. 7. With the Navigation-Buttons (JI) choose the option “Rotor”. 8.
4. With the Navigation-Buttons (NH) choose the option “Tuner configuration” and press the OKButton. 5. With the Navigation-Buttons (NH) choose the option “DVB-S2 Tuner” and press the OK-Button. 6. With the Navigation-Buttons (NH) choose the option “Configuration”. 7. With the Navigation-Buttons (JI) choose the option “Extended”. 8. With the Navigation-Buttons (NH) choose the option “Satellite”. 9. With the Navigation-Buttons (JI) choose the desired Satellite. 10.
DVB-C Tuner configuration 3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OKButton. 4. With the Navigation-Buttons (NH) choose the option “Tuner configuration” and press the OKButton. 5. With the Navigation-Buttons (NH) choose the “DVB-C Tuner” and press the OK-Button. Frequency bands This type of searching scans the frequencies used by most cable providers. This setting is the default. 1. With the Navigation-Buttons (NH) choose the option “Used service scan type”.
DVB-T Tuner-Configuration 7.3 DVB-T Tuner-Configuration Follow this steps: 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OKButton. 4. With the Navigation-Buttons (NH) choose the option “Tuner configuration” and press the OKButton. 5. With the Navigation-Buttons (NH) choose the “DVB-T Tuner” and press the OK-Button. 6.
4. With the Navigation-Buttons (NH) choose the option “Automatic scan” and press the OK-Button. 5. Set all tuners with which you want to search to “yes”. Use the Navigation-Buttons (NH) choose the tuner and the Navigation-Buttons (JI) to switch to “yes”. 6. Press the OK-Button to start the scan. Automatic scan Use the Navigation-Buttons (NHJI) to set the “Clear before scan” option to “Yes” if you want to delete all services before the scan starts.
You can see the progress of the scan here. The scan is done once you see this menu. It shows how many channels were found during the scan. Press the OK-Button to store the found channels or the EXIT-Button to cancel.
7.5 Manual scan Follow this steps: 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OKButton. 4. With the Navigation-Buttons (NH) choose the option “Manual scan” and press the OK-Button. Manual scan With the Navigation-Buttons (NH) choose the tuner on which you want to run the manual service scan.
Chapter 8 Systeminformation 8.1 Service This window shows detailed technical information about the current service. Kanal-Informationen Follow this steps: 1. Press the MENU-Button in order to open the main menu. 2. Navigate to the option “Information” and press the OK-Button. The “Information” menu will open up. 3. Navigate to the option “Service” and press the OK-Button.
8.2 About (Hard- and Software) This window shows all relevant information about the Hard- and Software of your Dreambox. Hardware- and Software-Information Follow this steps: 1. Press the MENU-Button in order to open the main menu. 2. Navigate to the option “Information” and press the OK-Button. The “Information” menu will open up. 3. Navigate to the option “About. . . ” and press the OK-Button.
Chapter 9 Updating the software 9.1 Backing up your settings Before installing newer software on your Dreambox you should backup your settings, otherwise they will be lost. 1. Press the Menu-Button to open the main OSD menu. 2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button. 3. With the Navigation-Buttons (NH) choose the option “Software management” and press the OKButton. 4.
9.3 Updating a new software 9.3.1 using the DreamUP program How do I install new software on my Dreambox DM7020 HD ? Requirements: • PC with Windows operating system • DreamUP software (current version under http://www.dreambox.de) • 1 mini-usb-to-usb cable • 1 network cable (optional but recommended) 1. Firstly disconnect your Dreambox from main power. 2. Connect the mini-USB-connector of the “mini-USB-toUSB-cable” to the service-port of your dreambox and the usb-connector to your computer. 3.
6. Start the DreamUp software on your PC. 7. Select the com-port which the “mini-USB-to-USB-cable” is connected to, as described above. In our example “COM4”. 8. Check the “Use network” box if your PC and Dreambox are connected using a network cable The software update can be done without network support, but it takes at least 30 minutes. 9. Enter your PC’s IP under “Local-IP (PC)” you’re your Dreambox’s IP under “Foreign-IP (Box)”. 10.
12. After the flash loader has been transferred to your Dreambox select the “Flash Box” Button in the DreamUp software. 13. Select the software image and click on the “Open” button. 14. The new software is now being transferred to your Dreambox. 15. If the process was successful you will get a “Box was flashed successfully” message. 16. Click on “OK” and on “Exit” afterwards. 17. Disconnect and reconnect your Dreambox from main power.
9.3.2 With browser With activated DHCP server Requirements: • PC with browser like. Firefox, Opera, Internet Explorer • latest Software for your Dreambox, downloadable under www.dreambox.de • 1 networkcable • DHCP-Server You need the image file you want to flash (downloadable under www.dreambox.de). Image files have the extension “*.nfi”. You can’t flash other images like “*.img” files. Don’t try it - it won’t work.
2. Click on “firmware upgrade” on the given site in your Browser. 3. On the next page, you can select the flash image you want to flash. Be sure that it has the “.nfi” extension. You can’t flash other images (like .img)! 4. After you selected the desired image click on “FLASH!” and wait. It might take some time to upload and flash the image - until you see 100% in your browser. The progress bar only works with activated Javascript. Make sure that Javascript is activated in your Browser.
Chapter 10 Troubleshooting Problem Possible cause Solution No audio, no video, OLED-Display lit Faulty wiring Check wiring and connections Faulty LNB Exchange LNB Wrong Tuner setting Review settings (see chapter 7.1 DVB-S2 Tuner-Configuration on page 58) Dish aligned incorrectly Realign dish Heavy rain or snow Remove snow from dish Dish aligned incorrectly Realign dish Dish is too small Install larger dish An obstacle between dish and satellite (e.g.
Chapter 11 TV-Mode setup With the Dreambox remote control you have the possibility to control the dreambox and your tv device with only one remote control. In order that your tv device reacts to the signals of the remote control, you have to program it before. There are 3 options for programming the rcu: 1. Programming with Code 2. Programming by Learning function 3. Programming by Scan function Please read the steps of each programming method carefully, before you proceed.
3. As soon as the tv device shuts down (Hint: Depending on the type of your tv device, this can last some minutes), immediately press the OK-Button to store the current code and leave the scan-mode. If no code is entered within 6 seconds or the TV-Mode-Button is pressed, the remote control will exit the programming mode automatically. Programming by Learning function In this programming method the functions of the keys of your tv-remote control unit can adopted to the dreambox rcu one-on-one.
If no code is entered within 6 seconds or the TV-Mode-Button is pressed, the remote control will exit the programming mode automatically. Dreambox-Mode and TV-Mode Dreambox-Modus Press the DREAM-Mode-Button in order to activate the Dreambox-Mode in your rcu. Use the two DIP-Switches in the battery compartment on the back, if you are going to use more than one dreambox in a single room.
Chapter 12 Technical data • 400 MHz MIPS Prozessor • Enigma2 (Linux OS) • MPEG2 / H.264 Hardware decoding (DVB compliant) • 2x Smartcard-Reader (Dreamcrypt™) • 2x DVB Common-Interface • HDMI • Scart (TV) • 10/100 Mbit compatible Ethernet Interface • Internal SATA Connector: Support for all regular hard disks (3,5" SATA) • eSATA connector • 3x USB 2.
Additional info: DVB/S2-Tuner: supports DVB-S2 Broadcast Services profile Frequency Range: 950 - 2150 MHz Demodulation DVB-S (QPSK) EN 302 307 Signal Level Input - 65 dBm...- 25 dBm Noise factor 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC-Capture range: +/- 3 MHz Demodulation Shaped QPSK und 8PSK FEC Viterbi and Reed-Solomon Viterbirates 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9 Roll-off Factor 35 % Common-Interface: Common-Interface, Power Consumption max.
Function: Update of Firmware Ethernet: 10/100 Mbit compatible Interface Function: Update of Firmware USB: USB 2.0 Host (3x) SATA-Interface: Connector for internal 3,5” HDD external eSATA-Connector LNB power and polarisation per tuner: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB-shut-off at Standby-Mode Count of active satellite position: DiSEqC™ 1.0/1.1/1.
Chapter 13 Features • Single-EPG (Electronic Program Guide): sortable by date or alphabetically • Automatic search for additional air dates of a show and easy recording them by timer • Multi-EPG: graphically and text-based • up to 8 simultaneous recording (4 for each Transponder) • Timeshift • List of recordings: sortable by date or alphabetically and free choice of different views • Timer programming manually or by EPG • Individually configurable timers, e.g.
• DVB/Teletext subtitle • Integrated Teletext with level 2.5 support • Radiotext / RaSS (Infos at www.rass.
Chapter 14 Contact & Support Information Headquarter & Distribution: Dream-Multimedia GmbH Pierbusch 24-26 44536 Lünen Germany Dealer’s Hotline: (Dealers only) Tel.: +49 (0)180 - 3 44 11 30 992 Fax: +49 (0)180 - 3 44 11 30 993 You can reach the dealer’s hotline from: Mo - Fr. 09:00 am - 12:00 pm and 01:00 pm - 03:00 pm Technical Hotline: Tel.: +49 (0)180 - 3 44 11 30 990 Fax: +49 (0)180 - 3 44 11 30 991 You can reach the technical hotline from: Mo - Fr.
Dealers & Pricing: E-Mail: info@dream-multimedia-tv.de Technical Support: E-Mail: support@dream-multimedia-tv.de Website: Weblink: http://www.dreambox.de Support Forum: Weblink: http://www.dreambox.de/board Software Support (actual images): Weblink DM7020 HD: http://www.dm7020hd.
Chapter 15 Copyright notes ©Dream-Multimedia 2012. All rights reserved. This document is copyrighted with all rights reserved. Under copyright laws the documentation may not be copied, photocopied, reproduced, translated, or reduced to electronic medium or machine readable form, in whole or in part without prior written consent of Dream-Multimedia GmbH. Failure to comply with this condition may result in prosecution.
