Owner manual

Network interface The Communication Port is an Ethernet port. It is used to communicate with your

Dreambox via HTTP, FTP, NFS, Telnet, SSH and Samba to access your recorded movies, to upload

channel lists, etc. This port is also used to update the operating system of your Dreambox. Please

use a regular patch cable to connect your Dreambox to your LAN.

2 x USB 2.0 port The USB 2.0 Port is designed for devices that support the USB 2.0 standard. The amount

of supported USB devices depends on the installed image (Software) and is still under development.

Antenna output OUT / input IN (Tuner-Slot B) Connect the coaxial cable from your DVB-T antenna or

cable wall box here.

LNB input Connect the coaxial cable from your LNB here.