Owner manual

5.3 Recording
5.3.1 Instant recording
Press the Record-Button.
You have five available options.
1. Add recording (indefinitely)
2. Add recording (stop after current event)
3. Add recording (enter recording duration)
4. Add recording (enter recording endtime)
5. Don’t record
Use the up/down-Buttons to navigate to you desired selection and press the OK-Button to select.
A ongoing recording is indicated by a flashing symbol in the Infobar (see Chapter 3.9 Infobar on page 21).
During a recording you can watch another service, view a previously recorded movie or add an additional
recording.
The number of simultaneous recordings depends on the number of installed tuners and on the number of
services residing on a transponder (see Chapter 4.7 Alternative services on page 33) . It is possible to make
up to eight simultaneous recordings.
Pressing the Up/Down-Buttons on your remote control activates the service list. The recording continues
in the background. Once a recording is started, no matter if manually or by timer (see Chapter 5.3.3
Recording by timer on page 41) it will be signaled by a note on the screen.
If all tuner are used for recording or by the Picture-in-Picture mode and you are trying to access a service
that is not on one of the recorded transponders you will get the “No free tuner” message.
5.3.2 Stop recording
Switch to the service which recording you want to stop.
1. Press the Record-Button.
2. With the Navigation-Buttons (NH) choose the option “Stop recording” and press the OK-Button.
If you only have one active recording it will be stopped immediately. If more than one recording is active
you will given the choice which recording you want to stop.
5.3.3 Recording by timer
With the help of a timer you can record shows to your hard disk (if you have a hard disk installed). You
are offered two different ways to program a timer, the manual way of via the EPG.
41