Owner manual

Chapter 7

Service searching

In this chapter you will learn how to setup the tunerconﬁguration for the reception with a satellite-dish

(DVB-S/S2), via cable television (DVB-C) or via digital terrestrial television (DVB-T) in your dreambox

and how to perform a service scan.

7.1 DVB-S2 Tuner-Conﬁguration

7.1.1 Single satellite – direct connection

Use this type of conﬁguration if you want to receive a single satellite with a Single Universal LNB. The coax

cable is directly connected from your Dreambox to the LNB.

Single satellite – direct connection

Follow this steps:

1. Press the Menu-Button to open the main OSD menu.

2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button.

3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OK-

Button.

4. With the Navigation-Buttons (NH) choose the option “Tuner conﬁguration” and press the OK-

Button.

5. With the Navigation-Buttons (NH) choose the option “DVB-S2 Tuner” and press the OK-Button.

6. With the Navigation-Buttons (NH) choose the option “Mode”.