Instruction Manual

- 15 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
Explanation remote control buttons
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV.
See chapter 15. TV-Mode setup.
The Power-Button switches your Dreambox on and off.
See chapter 4.1 Turning your Dreambox on and off.
The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will
shortly light up once your press the button.
The TV-Mode-Button switches your remote control into TV control mode to control your
preprogrammed TV. It will shortly light up once your press the button.
See chapter 15. TV-Mode setup.
Enter a service number to directly access the option by using the Numeric Keypad. The
service numbers are on the left side of the service list.
The Numeric Keypad can also be used to enter the Teletext page number.
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the
last 20 channels you have watched. If you have selected a sub service (see chapter 4.6) you
can use these buttons to switch to the next sub service.
During text input the Arrow-Left-Button will delete the character left to the current position
and the Arrow-Right-Button will delete the character right to the current position.
SHIFT / SETUP-Button
Power-Button
TV-Mode-Button
Numeric-Keypad
Arrow-Left-Button
Arrow-Right-Button
DREAM-Mode-Button