Instruction Manual

- 85 -
U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
11.3 DVB-T Tuner configuration
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option “Setup” and press the OK-Button to select
.
1. Navigate to the option “Service searching” and press the OK-Button.
¾ The “Service searching” menu will open up.
2. Navigate to the option “Tuner configuration” and press the OK-Button.
¾ The “Choose tuner“ menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-T Tuner and press the OK-Button.
¾ The “Reception settings” menu will open up.
Choose your region by pressing the Navigation-
Buttons left/right.
If you have connected an active antenna and you
want to run the antenna without it’s original power
supply set the “Enable 5V for active antenna” option
to “On”.
Press the OK-Button to save your settings.