User Manual

-52-
AC3 default:
If a program is transmitted with an AC3 audio track (e.g. Dolby Digital), the Dreambox switches automati-
cally to this audio track.
Volume control of AC3 signals only works if AC3 downmix is activated. Please keep in mind that AC3 down-
mix will disable the output of real AC3 signals on every audio out, even on the S/P DIF output.
AC3 downmix:
If you’re watching a show with a AC3 audio track it will be changed into a stereo signal. Set this option to
“yes” if your have an AV-Receiver that does not support Dolby Digital.
OSD visbility:
Use the Navigation-Buttons left/right to set the transparency of the OSD.
These options are only available if the output type is set to “Scart”:
Mode:
Scart
Select the standard supported by your TV screen. This is usually either PAL or NTSC. If you own a TV screen
which supports both modes you can also select the Multi option. You TV screen will automatically switch
depending on the input signal. These options are only available ifthe output type is set to “Scart”.
Aspect ratio:
Automatic (Standard)
4:3showswillbeshownas4:3and16:9showswillbeshownas16:9.
4:3
Display 16:9 content as:
Letterbox
16:9programswillbedisplayedon4:3TV’swithblackbeamsattopandbottom.
Pan&Scan
16:9programswillbezoomedtofullhighton4:3TV’s,partsofthepictureontheleftandrightsidewillcut
off.
Just Scale
4:3showswillbeshowninfullheightona16:9screenandarestretchedtotthewidthofyourscreen.
16:9 und 16:10:
Display 4:3 content as:
Please see previous page.
Color format:
CVBS (FBAS),
RGB (Red, Green, Blue separated),
SVideo (Color- and Brightness signal separated).
WSS on 4:3:
Checkthecheckboxtodisablezoomingonsome16:9TV’sduring4:3transmissions.
VCR Switch: