Assembly Instructions

A. Headboard (1 pc) B. Footboard (1 pc) C. Side Rail (4 pcs)
C1 C2
G.
Wood Slat System (1 pc)
F. Side Rail Leg (2 pcs)
D. Headboard Leg (2 pcs) E. Footboard Leg (2 pcs)
H. Center Leg (7 pcs)
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
PARTS LIST
HARDWARE LIST
(Continued on back)
STEP 1
STEP 3
ASSEMBLY INSTRUCTIONS
STEP 2
TOOLS REQUIRED:
Phillips Screwdriver
A
A
Attach Headboard Legs (Part D) to the Headboard (Part A) using three
50mm Bolts (Part K) and three Spring Washers (Part N) per leg. Secure
tightly using Large Hex Key (Part L).
Attach the Side Rails (Parts C1 & C2) to Side Rail Leg (Part F) using
four 30mm Bolts (Part I) and four Flat Washers (Part O). Secure
tightly using Large Hex Key (Part L). Repeat this process for the
other Side Rail.
Attach the Side Rails to the Headboard (Part A) and Footboard
(Part B) by sliding the side rail brackets onto the bolts on the
Headboard Legs (Part D) and Footboard (Part B). Secure tightly
using Small Hex Key (Part M).
K. 50mm Bolt
(8 pcs)
L. Large Hex Key
(1 pc)
J. 40mm Bolt
(7 pcs)
O. Flat Washer
(8 pcs)
P. 32mm Screw
(14 pcs)
N. Spring Washer
(6 pcs)
I. 30mm Bolt
(8 pcs)
M. Small Hex Key
(1 pc)
M
B
D
K
L
L
O
F
C1
C2
I
N
A
D
F
K
E
L
Unzip the black fabric on the back of the headboard and remove
the parts. Zip the black fabric closed after parts are removed.
Attach the Footboard Legs (Part E)
to the Footboard (Part B) using
two 50mm Bolts (Part K) and Large
Hex Key (Part M). Secure tightly.
D