Operation Manual

Infobar timeout Set the desired time after which you want the Infobar to disappear. You can choose
between one and ten seconds or “no timeout”.
Show event-progress in channel selection Show progress bar for each event in channel list.
6.2.2 Intermediate mode:
These settings supplement the settings in simple mode.
Automatic wakeup from standby for zap timers If this option is set to “Yes” your Dreambox will wakeup
from standby even for zap-timers and not only for recordings.
Recordings always have priority If this option is set to “Yes” your Dreambox will automatically switch to
the service which is supposed to be recorded in case there is a conflict with an existing timer. If you
set this option to “No” you will be asked if you want to switch to the service which is supposed to
be recorded.
Text subtitle presentation You can choose between the options “black box” or “drop shadow”.
Show positioner movement If you own a satellite dish with a positioner you can see a flashing symbol of
a satellite dish on your screen if you set this option to “yes”.
Enable multi bouquets Set this option to “Yes” if you want to use multiple bouquets.
Multi-EPG bouquet selection Enable this option if you want to be able to choose the bouquet before the
Multi-EPG is displayed.
EPG cache time span You can choose how many days in the future the EPG should be cached. Available
options: 7, 14, 21, 28 days.
Change bouquets in quickzap If this option is set to “Yes” you will automatically be taken to the next
bouquet while changing channels once you have reached the end of one bouquet.
Alternative radio mode Set this option to “Yes” if you want the handling in the Radio mode to be the
same as in the TV mode.
Action on long powerbutton press Set your desired option what is supposed to happen if you push the
Standby-Button for a few seconds. The possible options are “show shutdown menu” and “imme-
diate shutdown”.
Action on short powerbutton press Set your desired option what is supposed to happen if you push the
Standby-Button shortly. The possible options are “show shutdown menu”, “immediate shut-
down” and “standby”.
Position of finished Timers in Timerlist You can choose the position of finished timers in the Timerlist
overview. Available options: “at end” or “at beginning”.
Use legacy virtual subservices detection In normal case not needed (just for some broken cable providers...).
Please try the normal mode first)
49