Operation Manual

DVB-C Tuner conﬁguration

3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OK-

Button.

4. With the Navigation-Buttons (NH) choose the option “Tuner conﬁguration” and press the OK-

Button.

5. With the Navigation-Buttons (NH) choose the “DVB-C Tuner” and press the OK-Button.

Frequency bands

This type of searching scans the frequencies used by most cable providers. This setting is the default.

1. With the Navigation-Buttons (NH) choose the option “Used service scan type”.

2. With the Navigation-Buttons (JI) choose the option “Frequency bands”.

3. Press the OK-Button to save this settings.

Frequency steps

This type of searching scans the set frequencies step by step in a set increment.

1. With the Navigation-Buttons (NH) choose the option “Used service scan type”.

2. With the Navigation-Buttons (JI) choose the option “Frequency Steps”.

3. With the Navigation-Buttons (NH) choose the option “Frequency scan step size (kHz)”.

4. Use the Numeric-Keypad to set the step increment.

5. Press the OK-Button to save this settings.

The same setup possibilities apply if you are using a second DVB-C tuner in your Dreambox (see Chapter

7.2 DVB-C Tuner conﬁguration on page 62).