Installation & Assembly

*
F901 - 9cm
F902 - 18cm
F903 - 27cm
F1951 - 36cm
F1953 - 45cm
F1955 - 54cm
F1957 - 63cm
F1959 - 100cm
Gate Extensions
(sold separately)
*
For 9cm Gate Extensions
For all other Gate Extensions
Tension
Knob
Insert LONG END of
EXTENSION PIN
into Gate Frame
Gate
Extension
9cm
Gate Frame
NOTE: Wider gate extensions can
be used on the F776 gate section.
Replace the included 9cm gate
extensions with larger options,
listed below under Gate Extensions
(sold separately).
2A
2B
+F901
9cm
F776 gate only
75-84cm
Extension Frame
Gate Frame
Tension
Bolt
Tension Knob with
Rubber Pads
Extension Pin
Tension
Knob
Insert SHORT END of
EXTENSION PIN
into Gate Frame
Gate
Extension
27cm
Gate Frame
Insert Extension Pins into the holes on the outside of the Gate Frame (2A / 2B).
Next, slip Extension Frames over the Pins.
Finally, slide in the Tension Knobs and Bolts with Rubber Pads.
A maximum of 2 Gate Extensions can be used,
1 on each side of gate. Do NOT install 2 Gate Extensions on the same side of gate.
WARNING
2. To use with Gate Extensions.
4