User manual

Chapter 3

Basic operation

3.1 Turning your Dreambox on and oﬀ

Your Dreambox has a standby mode and a so-called deep-standby mode. Both functions diﬀer in their

power consumption and the time which is needed until the box has booted.

• Standby about 1 Second (higher power consumption)

• Deep-Standby about 1-2 Minutes (less power consumption)

Standby

To put your Dreambox into Standby-Mode either press the Standby-Button on your remote control or

directly on your Dreambox. In this mode the OLEd only shows the current time.

Deep-Standby

For putting your Dreambox into Deep-Standby-Mode, there are 3 options:

1. Holding down the Standby-Button on your remote control for three seconds.

2. Press the MENU-Button, with the Navigation-Buttons (NH) choose the option “Standby /

Restart” and press the OK-Button. With the Navigation-Buttons (NH) choose the option “Deep-

Standby” and press the OK-Button.

3. Alternatively you can push down the Standby-Button on your Dreambox for 5 seconds. If no OSD

Menu is visible on the screen this will also put your reambox into Deep-Standby-Mode. (If the OSD

Menu is still open press the EXIT-Button).

All your settings will be saved now and your Dreambox goes into Deep-Standby-Mode afterwards (saves

energy!). In this mode the OLED-Display doesn’t display anything.

Sleep-timer Put your Dreambox into Standby after a duration of time that can be chosen freely. (See

Chapter 3.13 Sleep timer on page 29)

Standby Puts your Dreambox into Standby mode.

Restart Your Dreambox will be rebooted.

Deep Standby Puts your Dreambox into Deep-Standby-Mode.