User manual

Time/Date Input
Press the Menu-Button in the Multi-EPG view.
A window will appear where you can enter a time and date.
After you have entered the desired time and date press the
OK-Button to activate your selection.
3.11 Teletext (Videotext)
Press the Text-Button to enter the Teletext. With the EXIT-Button you can leave teletext.
Keep in mind that not every station transmits Teletext!
Teletext - regular navigation
If you are viewing any Teletext page you can enter the interactive mode by pressing the OK-Button. Use
the Navigation-Buttons (NH) to select a text page number and press the OK-Button to call this page.
You don’t need to type in a text page number in this mode, but it is still possible.
Press the Mute-Button a couple of times to toggle between transparent-mode, invisible-mode and full
mode.
Press the Volume-up-Button to toggle between double high from the upper half, double high from the
lower half and full view text page.
Press the Volume-down-Button to activate or deactivate the PIG-Mode (Picture in Graphics). Same
view from Text page and Program picture. (best results are show on 16:9 TV’s during 4:3 transmission).
Teletext configuration menu:
If the Teletext page 100 is shown you can press the MENU-
Button to enter the Teletext configuration menu.
You have the following options:
Teletext - Selection Select the “Search” option and press the OK-Button to start searching for Teletext
information on other services without having to leave the service that you currently are watching. After
26