User manual

Manual programming
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (NH) choose the option “Timer” and press the OK-Button.
3. Press the green Options-Button to add a new timer.
Add Timer
You can choose between two different timer types. “Record” to record the desired show or “Zap” to
automatically switch to the service.
As repeat type you can choose between “once” and “repeated”.
The repeat type “repeated” offers you the following options:
• daily
• weekly with choice of weekday
• Monday through Friday
• user defined (for each day from Monday through Sunday)
For all four options you can set a date for the first execution of the timer You can decide what should
happen after the recording finishes by selecting the “After event” option. You can choose between
auto to keep your Dreambox in the same state as before the recording
do nothing to keep your Dreambox turned on after the recording
go to standby to put your Dreambox into Standby mode
go to deep standby to shutdown your Dreambox once the timer is done
Set you desired option by pressing the Navigation-Buttons (up/down and left/right) and press the
green Options-Button to save the timer.
42