User manual

Chapter 6
Setup
6.1 Language
1. If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (NH) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons (NH) choose the option “Language” and press the OK-Button.
5. With the Navigation-Buttons (NH) choose your desired language and press the OK-Button in
order to activate.
6.2 Customize
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (NH) choose the option “System” and press the OK-Button.
4. With the Navigation-Buttons (NH) choose the option “Language” and press the OK-Button.
5. With the Navigation-Buttons (NH) choose your desired language and press the OK-Button in
order to activate.
Setup modes
There are three different user modes: Simple, Intermediate and Expert.
This gives you the possibility to set the level of options to your needs. Intermediate is the default setting.
We will not explain the expert mode in detail in this manual.
6.2.1 Simple Mode
Margin before record (in Minutes): Set the desired forerun in minutes for a recording.
Margin after record: Set the desired lag in minutes for a recording.
Show blinking clock in display during recording: Select wether you want the time in the OLED-Display to
blink during a recording or not.
48