User manual

DVB-T Tuner-Configuration
7.3 DVB-T Tuner-Configuration
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OK-
Button.
4. With the Navigation-Buttons (NH) choose the option “Tuner configuration” and press the OK-
Button.
5. With the Navigation-Buttons (NH) choose the “DVB-T Tuner” and press the OK-Button.
6. With the Navigation-Buttons (JI) choose your region.
7. If you have connected an active antenna and you want to run the antenna without it’s original power
supply set the “Enable 5V for active antenna” option to “On”.
8. Press the OK-Button to save this settings.
7.3.1 Tuner B setup (DVB-T)
The same setup possibilities apply if you are using a second DVB-T tuner in your Dreambox (see Chapter
7.3 DVB-T Tuner-Configuration on page 66).
7.4 Automatic scan
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (NH) choose the option “Setup” and press the OK-Button.
3. With the Navigation-Buttons (NH) choose the option “Service searching” and press the OK-
Button.
66