User`s guide

FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or [e-mail]
Arcade Fighter Micro
PACKAGE CONTENTS:
• Arcade Fighter Micro
• User’s Guide/Warranty Card
• Registration Card
HOW TO USE:
1. Power on your Wii Console.
2. Sync the Wii Remote to the Wii Console. (for more information, please
refer to your Wii instruction manual)
NOTE: Use the Wii Remote to navigate through the Main Menu and start
the game. Then perform the following steps.
3. Connect the Wii Remote to the Arcade Fighter Micro’s plug, located
at the end of the cord.
4. The Arcade Fighter Micro will automatically power on once the Wii
Remote is connected to the plug.
NOTE: Please check your Game User’s Manual for button configuration
for each game.
TURBO SETTING:
Turbo Setting is available to use on the following buttons: y, b, x, a, L, R,
Zl and Zr.
• Half Auto Turbo Mode: Holding down a button will continuously
perform the move associated with that button
To set: Press the Turbo Button and one of the above buttons simultane-
ously. The Turbo LED will light up for a second.
• Auto Turbo Mode: The move associated with that button set with
Turbo would perform continuously until canceled manually.
To set: Press the Turbo Button and one of the above buttons simultane-
ously a second time. The Turbo LED will flash rapidly.
• Canceling Turbo Mode: This will cancel and exit Turbo mode.
To cancel: Press the Turbo or Clear Button and one of the above
buttons simultaneously a third time.
NOTE: Pressing the Clear button will not cancel the Turbo mode
completely. In order to completely cancel out of Turbo mode, press the
Turbo Button and one of the above buttons a third time.
MACRO SETTING:
Macro Setting is available to use on either the ZL or ZR buttons. You can
use the Macro Setting to record moves and press one button to use the
moves.
To set:
1. Press the Macro button at the bottom of the Arcade Fighter Micro to
start recording.
2. Press either the ZL or ZR button to set button.
3. Record move set (up to 16 steps).
4. Once move set has been completed, press the Macro button to end
recording.
5. When the desired button is pressed, the recording of moves will be
done.
NOTE: To record a move set, release joystick or button after every move.
For example, if your move requires a “Down, Down/Right, Right” motion,
after you start recording, press “Down” key, release, press “Down/Right”
key, release, press “Right” key, release, press “Y” key, release. Then
press Macro.
To cancel:
1. Press the Macro button. The Macro LED will light up.
2. Press either ZL or ZR (whichever one you need to cancel). The Macro
LED will flash rapidly.
3. Press the Macro button again. The Macro LED will go out.
TROUBLESHOOTING:
Problem: The buttons are not configured correctly.
Solution: Please check your Game User’s Manual for button configura-
tion. Also, check the Settings or Options in the Game Menu to change
button configuration.
Problem: The Arcade Fighter Micro is not turning ON.
Solution: Make sure that the Wii Console is powered ON. Make sure
that your Wii Remote is connected to the plug at the end of the cord
from the Arcade Fighter Micro properly and securely.