User Manual

11
(ii) Using The Hood
37-52mm Hood helps to protect your camera and les from side light that can
effect the picture quality with undesired reflections.
To use the hood you need to screw it in the Lens Cup using the 37mm thread.
The 52mm thread at the wide end allows you to attach filters.
NOTE: The standard Hood can be used only with 17mm thread lenses of
appropriate size. Although some optical lenses may come with its own hood, but
in some cases you may need to purchase a bigger and longer hood to use it with
some lenses.
(!)TIP: The Hood can be mounted on top of 37-17 Step Down adaptor or without it
directly to 37mm thread in the Lens Cup.
(iii) Using Optical Filters
You can have a better control over the natural light and reflections by using
optical filters. One CPL and one ND2 52mm filters are included in every Evolution
Rig set. You can screw the filters directly in the Lens Cup 52mm tread or use it
with the Hood.
Both filters are helpful mainly for outdoor filming. ND2 will cut the light intensity
by a half to help you capturing a better image against the light source. CPL will
make you able to control reflections and colours intensity on a sunny day. To
learn more about the benefits of using the optical filters please check
www.dreamprip.com or any other information source.
NOTE: To use the effect of ND filter you need to switch your phone camera to
manual ISO settings. In Auto mode this filter effect will be automatically
compensated by camera software.