User Manual

13
(v) Connecting The Shoulder Strap
Each of the two Grips has a cavity below the cold shoe platform to fix the Strap
end in it.
To attach the Strap you need to:
- remove the stopper first;
NOTE: Check attentively the default sequence of the locks on both ends of the
strap and the way the ends loop over the Trapeze Stopper before removing it.
- then move the Strap end through the Grip cavity;
- loop the end through the Stopper the same way and pull the strap out with two
ends:
Pic.14. Fixing the Strap with the Trapeze Stopper.
The Stopper will fix the strap tightly in the Grip cavity. Repeat the same operation
to fix the second end. Use the other locks to fix the free end of the Strap.
(vi) Connecting To A Tripod (not included)
You may connect DREAMGRIP™ Evolution Rig to any tripod with the standard
¼” screw that most of tripods have. To do it you may choose one of the following
options:
1) If you use original DREAMGRIP™ Light Tripod - connect the Rig with Track
Connecting Adaptor (not included in the Rig sets). It delivers the best and secure
hold to a tripod head.
2) Connect to the standard ¼” Bolt at the lower Track using the universal female
¼” thread.
3) Use any other ¼” bolt and nut (not included) to have tripod screw tighten
through the Track cavity.