Operation Manual

User’s Manual
GB
30
CM
PACKAGE CONTENTS
The DreamLED Cube consists of:
* LED Cube
* Induction plate for charging LED Cube
* RGB RF remote control
* 230V DC adapter
FEATURES & INSTALLATION TIPS
• Can be used indoor and outdoor, from home decoration to lighting in the bedroom or the swimming pool
• Wireless induction charging
• Low carbon, energy-saving, and environmental production
• Safe and reliable with aluminum coating battery, protected against high temperatures and explosion resistant
• Long life span, with high brightness RGB latest generation LED
• High degree of protection, IP68, 100% waterproof
• High-tenacity, against deformation, not easily broken
• The way to extend the battery life is charging promptly when power is low
• The remote control, adapter and charging plate are NOT waterproof. Please keep away from water.
CHARGING INSTRUCTIONS
1) Connect the adapter with the induction charging plate and plug into an outlet with an input voltage of 100V-240V AC.
See illustration 1
2) Place the LED Cube on top of the induction charging plate to charge. The indicator light on the charging plate and the
adapter will be red.
See illustration 2
3) The indicator light will turn green when fully charged (charging time = approx. up to 10 hours).
Note: When the lamp is fully charged but not in use (standby mode), it will still use power. This means that the battery capacity
will go down from 100% to 0% within a certain period of time. Exact time depends on the last used settings. Please recharge
rst when needed.
DESCRIPTION OF THE RF REMOTE CONTROL
See illustration 3
1. ON/OFF: Turn the LED Cube ON/OFF
2. DIM-keys: Brighten or darken the chosen color
3. Main colors: Red, green, blue and white
4. Predened colors: Change the main colors
5. FLASH: The LED Cube will ash in white color (*)
6. AUTO: All available light effects are shown one by one (*)
7. FADE 7: 7 colors of the LED Cube will slowly change, from one color shade to another, without ashing (*)
8. JUMP 7: 7 colors of the LED Cube will change quickly (*)
(*) The brightness of these light effects can be adjusted using the DIM buttons (3).
RESET BUTTON ON THE BOTTOM SIDE
See Illustration 4
Whenever a problem occurs with the LED Cube (fails to work or does not longer respond to the remote control) just press
this button to reset the system. Place the LED Cube back on the charging plate and turn it on again using the remote control.
SAFETY INSTRUCTIONS
• Never open the LED Cube or the induction plate.
• Never touch the plug contacts with sharp or metal objects.
• Make sure that cables cannot cause a trip hazard.
• Use only the original power supply and original accessories.
• Never place the device in the vicinity of heat sources.
• Never place the unit on surfaces that are heat sensitive.
• Protect the device from special liquids and vapors.
• Unplug the unit at the main power socket before cleaning. Do not use any solvent based cleaning agents, only a soft, dry
anti-static cloth.
• Do not attempt repairs yourself.
• If the unit is not properly installed or operated DreamLED
®
cannot accept liability.
TECHNICAL DATA
- Operating voltage: 100-240V AC, 50/60 Hz
- Power supply: Euro
- Power consumption: max 8 watts
- Ambient operating temperature: -10 ~40 °C
- Humidity: 10% - 85% (none condensing)
- Storage temperature: -20 ~ 60 °C
- Storage humidity: 5% - 90% (none condensing)
- Protection class: LED Cube: IP68, Induction Plate: only for indoor use, Adapter: only for indoor use
LED Cube:
LED RGB IP68
DC 7,5V, 1A, 8W
16x EPISTAR LEDs, 2,8W total
Zollner 2600 Li-ion : up to 20 hours use
Max. 120 lumen
120° light angle
Dimensions (L*W*H): 300 x 300 x 300 mm
Induction Plate:
DC 7,5V at 1A
Remote:
433 MHz Radio Frequency
16 color buttons + 4 different color-light programs + DIM function + Auto
Battery: 2x AAA 1,5V
Adapter: Input: 100-240V * Output: 7,5V / 1A (2A thermal fuse)
SUPPORT
For more information, technical questions and return requests concerning this product, you should contact [e-mail].
GUARANTEE
Copyright © DreamLED
®
. DreamLED
®
is a registered trademark of TE-Group NV. The DreamLED
®
brand stands for superior
product quality and outstanding customer service. That is why DreamLED
®
warrants this product against all defects in material
and workmanship for a period of two (2) years from the date of original purchase of the product. The terms of this guarantee
and the extent of responsibility of DreamLED
®
under this guarantee can be downloaded from our website www.dream-led.eu.
RFC-30
GB
NL
FR
D
----------------------- Manual/DreamLED RFC-30/09-16/V01--------------------------
Copyright © DreamLED
®
DECLARATION OF CONFORMITY
ILLUSTRATION 1
2
1
3
5
7
6
8
4
ILLUSTRATION 2
ILLUSTRATION 3
ILLUSTRATION 4
Hereby,
Par la présente,
Company:
Entreprise:
Address:
Adresse:
declare that the following equipment:
déclare que le dispositif suivant :
Product name:
Nom du produit:
Product type:
Type de produit:
conforms with the following safety requirements of the directives 2014/30/EU,
2014/35/EU, 2014/53/EU & 2011/65/EU. Conformity is guaranteed by the CE-symbol.
est conforme aux exigences de sécurité suivantes des directives 2014/30/EU,
2014/35/EU, 2014/53/EU & 2011/65/EU. La conformité est garantie par le symbole
CE.
This product has been tested against following standards and specications,
applying versions valid in September 2016.
Ce produit a été testé par rapport aux normes et spécications suivantes, appliquant
les versions valides en Septembre 2016.
EN 55015 EN 61347 EN 61547
EN 62493 EN 61000 EN 60598
EN 60590 EN 301489 EN 300220
Joseph van Oosterum, CEO TE-Group NV
TE-Group NV
Kapelsestraat 61, 2950 Kapellen, Belgium
DreamLED RFC-30
RF RGB LED CUBE 30 CM