Installation Guide

DreamLineShowers.com | 11Freestanding Tub Installation Manual
Remove the spacers. Make sure all the legs are in
contact with the ground, so that the bathtub is not
supported by the skirt (see cut view below).
The bathtub must be tested before installation
is complete. Fill the bathtub to the overow and
inspect for leaks. Tighten and loose connections
between the hoses and motor by hand.
For models BTSC6032WFXXF00 (Seneca),
BTMO6032WFXXC00, BTMO6636WFXXC00 (Montego),
BTCA6032WFXXC00, BTCA6636WFXXC00 (Caspian) ONLY:
To complete the installation and solidify the bathtub, apply
a bead of silicone along the seam where the bathtub rests
against the skirt.
Skirt
Bathtub
Silicone
Cut view
Skirt
Bathtub
Cut view
⅛"
STEP 5 | Bathtub Preparation and Installation (CONTINUED)
5.4
Check me!
5.5
Check me!
The bathtub should not be
supported by the skirt.