Installation Guide

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
14
UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019
©2019 DreamLine. All Rights Reserved
Fig 9
NOTE: Following the installation of the Hinge Panel Glass (#32), it is required to allow the
silicone to fully cure before hanging the door glass. (Fig 9)
!
Fig 9
inside
9.
Tighten the rubber-tipped set screws on the
Hinge Panel Glass Bracket (#36) to secure the
hinge panel glass. (Fig 9)
Proceed to Step #19 on Page 22 to continue the installation of the Hinges,
Door Glass and other components
.