Installation Guide

NOTE: To maximize the life of your door, it is important to regularly inspect

the glass and other hardware for misalignment, proper attachment, and/or

damage. Contact DreamLine with any questions or concerns.

Product Maintenance

BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls:

wipe them off after each use with a soft cloth. To clean the acrylic back walls use

non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray

cleaners. Never use abrasive cleansers, metal brushes or scrapers that could

scratch or dull the surface.

GLASS: To ensure long-lasting life for your glass shower products: wipe them off

after each use with a soft cloth. Rinse and wipe off the glass using either a soft

cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch

the surface of the glass over time if left to dry). To prevent scratching the surface:

never use abrasive cleaners or cleaning products that contain scouring agents.

Never use bristle brushes or abrasive sponges that may scratch the surface.

HARDWARE: To ensure a long-lasting finish: wipe off the metal parts after each

use with a soft cloth. Do not use abrasive cleaners or cleaning products containing

ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible

to prevent damage to the finish (peeling or corrosion). After cleaning the polished

finishes, rinse thoroughly and wipe dry with soft cloth.

Clean stainless steel surfaces at least once a week. When applying stainless steel

cleaner or polish to stainless steel hardware, work with (not across) the grain.

Never use an abrasive sponge or cloth, steel wool or wired brush as these may

permanently scratch the surfaces.

UNIDOOR-X (STYLE M) manual Ver 2 Rev 1 02/2019