UNIDOOR-X (Style M1) SHOWER DOOR & PANEL GLASS INSTALLATION INSTRUCTIONS PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION STEP 1: Install Shower Door ! STEP 2: Install Inline Panel STYLE M1 NOTE: Refer to the Hinge Panel Glass Manual FIRST. 1-866-731-2244 For more information about DreamLine® products please visit DreamLine.
UNIDOOR-Xe Styled M e n v i r GLASS-TO-GLASS HINGE SLHOWERsD eOOR INSTALLATION m e a sR e r D ght © Ri All IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice for the purpose of product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
d e e in erv L s m e a R e r s t D gh © Ri All This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially-formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. d e e in erv L s m e a R the glass after e r For best results, squeegee s t D dryhwith a soft cloth.
Table of Contents Section title Important Steps Page # Model Numbers 3 2 d e e n v i r L e s m e a R e Dr ghts © Ri All Model Styles and Manuals Preparation Tools Parts List & Detailed Diagram of shower door components Installation of 6” Hinge Panel with Hinge Panel Glass Bracket 4~5 6 7 8 Installation of 24” Hinge Panel Glass with L-Bar™ 10~14 15~21 Hinges and Door Glass installation 22~23 Vinyl Seals 24~25 Adjustable Hinge instructions 27 Product maintenance 28 NOTE: Unpack your unit ca
! The hinge panel glass must be properly installed and secured to support the weight of the door glass. Failure to follow these steps may result in the hinge panel glass pulling out of the U-Channel.
Model Numbers d e e in erv L s m e a R e r s t D gh © Ri All UNIDOOR-X Style M with 6” hinge panel with Hinge Panel Glass Bracket UNIDOOR-X Style M with 24” hinge panel with Left or Right L-Bracket D12372-## D12472-## D12572-## D12672-## D12772-## D12872-## D12972-## D13072-## D32372L-## D32372R-## D32472L-## D32472R-## D32572L-## D32572R-## D32672L-## D32672R-## D32772L-## D32772R-## D32872L-## D32872R-## D32972L-## D32972R-## D33072L-## D33072R-## d e e in erv L s m e a R e r s t D gh © Ri l l A ##-
This Unidoor-X Style M manual is used with the following Model Styles: d e e in erv L s m e a R e r s t D gh © Ri All Style L1 Style M Style M2 Style M1 ! d e e in erv L s m e a R e r s t D gh © Ri l l A Style M4 Style M3 When installing one of the glass-to-glass hinges configurations shown above; Discard the Style A manual that is packaged with the door glass and use this Style M manual for the installation of the hinge panel glass and door glass.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
©2019 DreamLine. All Rights Reserved Tools Level d e e n Tape Phillips v i r L e Pencil Measure s Screwdriver m e a R e r s t D gh © Ri All Drill bit (Ø=5/16") Drill bit (Ø=1/8") Metal File 100% Silicone* Power Drill Hammer Miter saw or Hacksaw *Quick-drying/fast curing silicone recommended for the installation of hinge panels.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Installation steps Style M - 6” & 24” Inline Panel and Shower Door Installation NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR Style M, M1, M2, M3, M4 and L1 models. Before you begin the installation, please check your finished opening size and model dimensions to ensure proper placement of the Hinge Panel Glass (#32) and Door Glass (#01).
©2019 DreamLine. All Rights Reserved Installation steps for 6” hinge panel with Hinge Panel Glass Bracket 1. Draw a line on the threshold and up the wall to represent the outside edge of the U-channels. Make sure the line is parallel to the front edge of the threshold. (Fig 1) 2. Use a hacksaw or a miter saw: Cut the Vertical U-channel to 69-7/16”. Cut the Bottom U-channel** to 6”.
Hinge Panel Glass Bracket (#36) on the wall and threshold to mark the holes for drilling. (Fig 3) Outside edge of U-Channel ©2019 DreamLine. All Rights Reserved 3. Position the U-channels and 4. Mark the hole positions on the wall and threshold through the holes in the U-channels and the Hinge Panel Glass Bracket (#36). (Note that the Hinge Panel Glass Bracket (#36) is wider than the u-channel and must be aligned correctly with the u-channel).
install the wall anchors. • Drill Ø1/8” holes into an acrylic threshold OR •Drill Ø5/16” holes and install anchors for installation into a tile threshold. (Fig 5) ©2019 DreamLine. All Rights Reserved 5. Drill Ø5/16” holes in the wall and 6. Apply silicone to the back of the U-channels and the screw holes, then install the U-channels and Hinge Panel Glass Bracket (#36) using the ST4.2 x 40mm Countersunk Screws (#23).
into the bottom U-channel to protect the bottom corners of the glass. Apply a bead of silicone into the length of the U-channels. (Fig 7) ©2019 DreamLine. All Rights Reserved 7. Add the PVC Glass Spacer (0.5mm) (#34) 8. Install the Hinge Panel Glass (#32) into the U-channel, checking for level and plumb. Install the gasket into the Hinge Panel Glass Bracket (#36). (Note: Make sure the top of the hinge panel glass is at the top).
©2019 DreamLine. All Rights Reserved 9. Tighten the rubber-tipped set screws on the Hinge Panel Glass Bracket (#36) to secure the hinge panel glass. (Fig 9) d e e in erv L s m e a R e r s t D gh © Ri de insi l l A ! Fig 9 NOTE: Following the installation of the Hinge Panel Glass (#32), it is required to allow the silicone to fully cure before hanging the door glass. (Fig 9) Proceed to Step #19 on Page 22 to continue the installation of the Hinges, Door Glass and other components.
©2019 DreamLine. All Rights Reserved Installation steps for 24” hinge panel glass and the L-Bar™ 10. Cut the Vertical U-channel 1 (#09) to 71”. (Fig 10) U-Channel 1 d e e in erv L s m e a R e r s t D gh © Ri All 71” 71” Fig 10 11. Cut the Bottom U-channel 2 (#29) to 24” (see note** below).
onto the threshold, parallel to the outside edge. Mark the position of the U-channel and mark the position of the holes for drilling. You need to use at least 3 holes for the U-channel 2 (bottom profile) (#29): one near each end and one near the center. • Drill the holes into the threshold using an Ø1/8” drill bit. (Or use a Ø5/16” bit and anchor for tile) • Apply a bead of silicone to the bottom of the U-channel 2 (bottom profile) (#29) and attach it to the threshold using the ST4.
profile) on top of the installed bottom U-channel. Use a level to plumb the U-channel 1 (#09) (wall profile) and mark the positions of the holes for drilling. You need to use at least four holes for the U-channel 1 (#09) (wall profile). 1 ©2019 DreamLine. All Rights Reserved 13. Next, position the vertical U-channel 1 (#09) (wall 2 d e e n v i r L e s m e a R e 3 Dr ghts © Ri All • Drill the holes into the wall using a Ø5/16” drill bit. • Insert the Ø5/16“ Wall Anchors (#13) into the holes.
d2 e e n v i r L e s m e a R e Dr ghts © Ri All 15. Install the Hinge Panel Glass (#32) into the U-channel 2 (#29) (bottom profile) and the U-channel 1 (#09) (wall profile). Apply a dab of silicone to the exposed end of the bottom u-channel. (Fig 15a and 15b) 1 wall ©2019 DreamLine. All Rights Reserved ! NOTE: There is a top and a bottom to the Hinge Panel Glass (#32): The top hinge cutout is 7-7/8” to center, the bottom hinge cutout is 8-3/8” to center.
©2019 DreamLine. All Rights Reserved Installation steps for 24” hinge panel glass with L-Bar™ d e e n v i r L e s m e a R e Dr ghts © Ri 35.9 l l A L- Bar™ Assembly (#35) Parts List** 35.4 35.5 35.3 35.6 35.2 35.1 35.7 35.8 d e e n v i r L e s m e a R e Dr ghts © Ri All 1 pc 35.6 Wall plate Left-hand bracket shown as an example 35.1 35.2 35.3 35.4 35.5 PVC spacer Rubber tip set screw L-Bar™ (left hand shown) Decorative cover Ø5/16” Wall anchor 1 pc 2 pcs 35.7 Truss Head Screw ST 4.
©2019 DreamLine. All Rights Reserved Left-hand bracket installation shown as an example 16. Position the L-Bar™ Assembly (#35) onto the Hinge Panel Glass (#32) as shown and mark its position on the wall. Remove the Wall Plate (#35.6) from the L-Bar™. Hold the Wall Plate (#35.6) to the marks on the wall. Check for level and mark the holes for drilling through the wider, untapped holes. (Fig 16.2) Drill two Ø5/16”(8mm) holes and insert the Ø5/16” Wall anchors (#35.5).
©2019 DreamLine. All Rights Reserved 18. Adjust the Panel Glass to plumb and tighten the screws. Attach the Decorative Cover (#35.4). Secure the L-Bar™ (#35.3) to the top of the Panel Glass using the clear gasket and rubber-tipped set screws. Firmly tighten but Do Not overtighten the set screws.
1 out ©2019 DreamLine. All Rights Reserved 19. Attach the Glass-to-Glass Hinges (#05) to the Hinge Panel Glass (#32) with the bolts facing inside the shower. Install the hinges onto the Hinge Panel Glass (#32) flush with the edge of the glass. sid e d e e in erv L s m e a R e r s t D gh © Ri All Fig 19 Use at least one 2mm hinge gasket per side. Tighten the hinge bolts evenly and snap in the decorative bolt caps.
1 2 ©2019 DreamLine. All Rights Reserved 20. The Door Glass (#01) ships with 5/8” spacers. These 5/8” spacers will create the proper spacing at the bottom of the door glass and will ensure the installed door height finishes at 72”. (but always confirm with a measurement) 3 door glass inside door glass d e e in erv L s m e a e FigR r s t D gh 20 © Ri All 5/8” outside 2mm hinge gasket Set the Door Glass (#01) with the 5/8“ spacers attached onto the threshold, inline with the Hinge Panel Glass (#32).
Handle side of door 1 2 3 4 ©2019 DreamLine. All Rights Reserved 22. Measure the bottom of the Door Glass (#01) from side to side to determine the actual width of the door. Cut the Bottom Sweep Vinyl (#07) to the size of your measurement and notch 3/8” of the inner side of the Bottom Sweep Vinyl (#07) as shown in Fig 22.2. Press the Bottom Sweep Vinyl (#07) onto the bottom edge of the Glass Door (#01).
! ©2019 DreamLine. All Rights Reserved For Style M only: If your model does not include additional panel glass, proceed to the next step to install the L-Strike Vinyl w/VHB tape (#08) to the wall. 1 Inside shower NOTE: Before installing the L-strike vinyl, refer to the adjustable hinge instructions on Page 27. d e e in erv L s m e a R e r s D ght © Ri l l A Setting the hinges to overclose must be done BEFORE the L-Strike Vinyl w/VHB tape is installed.
©2019 DreamLine. All Rights Reserved 25. Apply a good quality mildew-resistant/waterproof silicone along the connection of both U-Channels to the wall and threshold on the inside of the shower. Remove the bottom section of the Hinge-Side Vinyl Seal (#33) and let the silicone cure before closing the door to avoid contact with the Hinge-Side Vinyl Seal (#33). (Fig 25) d e e in erv L s m e a R e r s D ght © Ri l l A NOTE: The surfaces need to be clean and free of debris before applying silicone.
©2019 DreamLine.
©2019 DreamLine. All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
d e e in erv L s m e a R e r s t D gh © Ri l l A d e e in erv L s m e a R e r s t D gh © Ri l l A TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.com ©2019 DreamLine.
Install the door first INLINE PANEL ® (STYLE F) d INLINE PANEL GLASS ILNSTALLATION ine rveINSTRUCTIONS e s m e PLEASE REVIEW THIS ENTIRE MANUAL PRIOR TO INSTALLATION a R e Dr ghts © Ri All d e e in erv L s m e a R e r s D ght © Ri All ® *with L-Bar™ support bracket right-hand inline panel installation shown *L-Bar™ only included with ELEGANCE PLUS models with nominal panel glass sizes 22”, 22-1/2”, 30”, 30-1/2”& 34” IMPORTANT! DreamLine® reserves the right to alter, modify or redesign products at an
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a ® soft cloth.
Section Title ClearMax™ Coating Information Warnings and General Preparaton Model Specific Preparation ® Tools Detailed Diagram of Inline Panel Glass Components Parts List Installation Steps 180º Strike Vinyl Installation Reversible L-Bar™ Installation (*for ELEGANCE PLUS model only) Product Maintenance Reversible L-Bar™ Feature Troubleshooting Factory Parts Information Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All d e e n v Symbol Legendi r L e s m e a R e Dr ghts © Ri All Page # — 2 3 4 5
d e e n v i r L e s m e a R e r s D ght © Ri All WARNING DISCLOSURE STATEMENT IMPORTANT • • • DreamLine® reserves the right to alter, modify or redesign products any time without prior notice for product improvement and customer experience. Please refer to the model’s web page on DreamLine.com for the latest technical drawings, installation manuals, warranty information or additional product details.
©2020 DreamLine® All Rights Reserved Model Specific Preparation ! REQUIRED: minimum threshold 1/2” Out-of-Plumb Adjustment with the Inline Panel; Verify threshold and walls with a level Threshold must be level ±0.0 d e e n v i r L e s m e a R e Dr ghts © Ri All ® ±0.0 ! Tile TIP Acrylic 5/8” minimum flat threshold right-hand orientation shown Tub Contact the manufacturer of the base, tub or threshold material with any questions regarding the drilling of holes into their product.
©2020 DreamLine® All Rights Reserved Tools Tape Measure Level Drill Bit Ø1/8" (3mm) Drill Bit Ø3/16" (4mm) Metal File TIP #2 Phillips Screwdriver Pencil 100 % Silicone d e e n v i r L e s m e a R e Dr ghts © Ri All Drill Bit Ø5/16" (8mm) Safety Glasses #2 Phillips Driver Bit ® Soft Head Hammer Work Gloves Hacksaw Razor Knife OR Power Drill Mitre Saw Professional-grade Glass Suction Cup (optional but recommended) Measure the finished opening before proceeding with the installation to b
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Detailed Diagram of Inline Panel Glass Components ® d e e in erv L s m e a R e r s t D gh 11 © Ri All 09 19 23 d e 29 e in erv L s m e a R e r s t D gh © Ri l l A 13 09 ® The glass surface with the ClearMax™ label must be installed facing the inside of the shower 23 5 right-hand panel installation shown © 2019 DreamLine® All Rights Reserved
©2020 DreamLine® All Rights Reserved Parts List 09 11 13 d e e n v i r L e x1 x1 s m e a R e Dr ghts © R23i 28 l Al ® Vertical U-Channel 19 180˚ Strike Vinyl Inline Panel Glass x1 29 ST4.2×40mm Countersunk Screw x18 Wall Anchor Ø5/16” (8mm) x18 PVC Glass Spacer 0.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 The Unidoor Plus, Unidoor-X or Elegance Plus Shower Door must be installed prior to proceeding with the following Inline Panel Glass installation instructions.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Installation Steps 1 d e e in erv L s m e a R e r s t D gh © Ri All 1 ® 2 insid e outs ide TIP To assist with aligning the Inline Panel Glass (#11) with the pre-installed Door Glass, hold the door glass parallel with the outside of the threshold and mark a reference line on the threshold.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 2 d e e in erv L s m e a R e r Glass s t D gWidth © Ri h (W) All ® W Glass Height (H) H d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 2 Parts Needed 11 x1 Tools Needed 9 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 3 Cut the Bottom U-Channel to: ® Glass Width (W) + 3/16” = (L)** (see exception below) Fig 3 (L) TIP d e e in erv L s m e a R e r s t D gh © Ri All OR (L) Plumb line Use a metal file to deburr the cut end ! **EXCEPTION: If the wall is out-of-plumb at the bottom, measure that dimension as (A) and add (A) to the finished cut length of the U-channel (+1/2” max): d e e in erv L s m e a R e r s t D gh © A Ri l l A ® Out-of-plumb at
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 4 d e e in erv L s m e a R71” (1803.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 5 d e e in erv L s m e a R e r s t D gh © Ri All Fig 5b ® Fig 5a 2” (50.8mm) d e e in erv L s m e a R e r s t D gh © Ri l l A ® ! Cut several 2” - 3” pieces of the PVC Glass Spacer 0.5mm (#28).
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 6 d e e in erv L s m e a R e r s t D gh © Ri All ® d e e in erv L s m e a R e r s t D gh © Ri l l A ® Fig 6a NOTE The 180˚ Strike Vinyl (#19) will extend above the panel glass for now, but will be notched to fit around the bottom u-channel. See step#14.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 7 1/2” MAX d e e in erv L s 2 1am e R e r s t D gh © Ri All ® inline pane l doo door 3 panel r 1/16” - 1/8” 4 5 d e e in erv L s m e a R e r s t D gh © Ri l l A ® NOTE Fig 7 NOTE The top of the Inline Panel Glass must be flush with the top of the Door Glass. (Fig 7.3) The Vertical U-Channel (#09) will allow for up to 1/2” of out-of-plumb adjustment.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 8 d e e in erv L s m Fige 8b a R e r s t D gh © Ri All ® Fig 8c d e e in erv Fig 8a L s m e a R e r s t D gh © Ri l l A ® NOTE Remove the PVC Glass Spacers 0.5mm (#28) from the Bottom U-Channel (#29). (Fig 8c) These must be reinstalled in step #12.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 9 NOTE Fig 9 NOTE The surfaces need to be clean and free of debris before applying silicone. d e e in erv L s m e 1 2 a R e r s t D gh © Ri All 3 1 3 ® 2 d e e in erv L s m e a R e r s t D gh © Ri l l A ◾For installation into an Acrylic Threshold: drill an Ø1/8”(3mm) hole and use the ST4.2 x 40mm Countersunk Screw (#23) OR ◾For installation into a Tile Threshold: drill a Ø3/16”(4.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 10 d e e in erv L s m e a R e r s t D gh © Ri All ® 1 ® ! 2 e r n i L e s m e Fig 10 a R e r s t D gh © Ri l l A d e v Parts Needed 23 x4 Tools Needed To prevent damage to the glass, be sure that the screws are fully countersunk and that the screw heads do not stick up above the surface of the u-channel 17 © 2019 DreamLine® All Rights Reserved
d e e in erv L s m e a R e r s t D gh © Ri 1 All 2 ® ® Fig 11 e r n i L e s m e a sR e r D ght © Ri l l A d e v 3 ip olt to INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 11 Parts Needed 23 x4 Tools Needed 18 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 12 1 d e e in erv L s m e a R e r s t D gh © Ri All ® 2 d e e in erv L s m e a R e r s t D gh © Ri l l A Fig 12 NOTE 3 ® After applying silicone into the bottom U-Channel install several 2” - 3” pieces of the PVC Glass Spacer 0.5mm (#28) into the Bottom U-Channel (#29) to protect the bottom edge of the glass. (Fig 12.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 13 2d e e in erv L s m e a R e r s t D gh © Ri ll A 1 1 ® 1 2 2 d e e in erv L s m e a Fig 13 e R r s t D gh © Ri l l A ® Tools Needed 20 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 180° Strike Vinyl Installation 14 d e e in erv L s m e a 2 R e r s t D gh © Ri All ® 1 3 inside inline panel 1” 4 door panel d e e 1/16” 1/8” n v i r L e s m e a sR e Fig 14 r D ght © Ri l l A ® Parts Needed 19 x1 Tools Needed 21 © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 15 The surfaces need to be clean and free of debris before applying silicone. NOTE d e e in erv L s m e a R e r s t D gh © Ri All ® 24 Hours NOTE If the model does not include an L-Bar™ Support Bracket, this completes the Inline Panel installation.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Installation 16 (L-Bar™ for ELEGANCE PLUS model only) d e e in erv L s m e a R e r s t D gh © Ri All ® 30.5 30.2 30.6 30.9 30.10 30.8 30.1 30.7 30.11 30.3 30.12 30.4 Right-handed orientation shown* NOTE NOTE Item Item Description Quantity 30.1 30.2 30.3 30.4 30.5 30.6 30.7 30.8 30.9 30.10 30.11 30.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 17 3 d e e in erv L s m e a R e r s t D gh © Ri All 1 ® 2* 5 6 7 d e e in erv L m Res TIP rea D ghts © Ri l l A Fig 17 4 ® right-handed installation shown *see NOTE *Leave the L-Bar™ decorative cover attached when marking the L-Bar™ position on the wall to allow space (1/16”-1/8”) to re-attach the cover plate after installation. NOTE 24 *The 0.5mm PVC Spacer (#30.4) for the L-Bar™ Glass Holder (#30.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 18 1 2 ® e in3* d e rv L e s m e a sR e r D ght © Ri All Max 3/16” (4mm) 4* Max 3/16” (4mm) Fig 18 right-handed installation shown d e e in erv L s m e a R e r s t D gh © Ri l l A ® NOTE * To adjust the angle of the L-Bar™: 25 Loosen the M5 x 14.5 screws, rotate the appropriate set screw (See Fig 18.3 and 18.4) to adjust the angle of the L-Bar™ (up to 3/16” (4mm)) in the desired direction. Hand tighten the M5 x 14.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 19 d e e n erv i L 2 s m e a R e r s t D gh © Ri All ® 1 0 - 1/16” (2mm) 3 Fig 19 right-handed installation shown d e e in erv L s m e a R e r s t D gh © Ri l l A ® Tools Needed 26 © 2019 DreamLine® All Rights Reserved
©2020 DreamLine® All Rights Reserved Product Maintenance BASES and BACKWALLS: To ensure long lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could permanently scratch or dull the surface.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Feature: Glass Holder (for ELEGANCE PLUS®model only) left-handed orientation Step 1 d e e in erv L s m e a R e r s t D gh © Ri l l A 1 2 3 4 6 5 d e e in erv L s m e a R e r s t D gh © Ri l l A ® Tools Needed 28 left-to-right handed orientation shown © 2019 DreamLine® All Rights Reserved
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Reversible L-Bar™ Feature: Wall Bracket 1 5 2 6 9 d e rv ® in3 e L e s m e a sR e r D ght © Ri All 7 Step 2 4 8 ® n10e i L e s m e a sR e r D ght © Ri l l A d e rv right-handed orientation Tools Needed 29 left-to-right handed orientation shown © 2019 DreamLine® All Rights Reserved
Problem/Symptom Suggested Solution •Check all shipping/packaging material for missing parts/components. •If not found, contact DreamLine Customer Support [1-866-731-2244] to order factory part replacement. Missing Parts •Inspect the 180º Degree Strike Vinyl (#19) and ensure the orientation of the Door Glass does not close vinyl is correct.
INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 Factory Parts Information d e e in erv L s m e a R e r s t D gh © Ri All INLINE PANEL [STYLE F] - HARDWARE ITEM # ® FACTORY PART NUMBER FACTORY PARTS INFORMATION ITEM DESCRIPTION 09 04154011-1930 / 04154041-1930 / 04154061-1930 / 04154091-1930 U-Channel 1" Aluminum for 10mm (3/8in.
©2020 DreamLine® All Rights Reserved Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All ® Elegance Plus w/inline panel SHDR-443060-## SHDR-443465-## SHDR-444014-## SHDR-444622-## SHDR-4452225-## SHDR-4458305-## Unidoor Plus Style F SHDR-242907210-## SHDR-243007210 SHDR-243107210 SHDR-243207210 SHDR-243307210 SHDR-243407210 SHDR-243507210 SHDR-243607210 SHDR-242957210 SHDR-243057210 SHDR-243157210 SHDR-243257210 SHDR-243357210 SHDR-243457210 SHDR-243557210 SHDR-243657210 SHDR-243707210 SHDR-2438
©2020 DreamLine® All Rights Reserved Product SKUs d e e n v i r L e s m e a R e Dr ghts © Ri All ® Unidoor-X Style M1 D12306572-## D1230672 D12314572 D1231472 D12322572 D1232272 D12330572 D1233072 D12406572 D1240672 D12414572 D1241472 D12422572 D1242272 D12430572 D1243072 D12506572 D1250672 D12514572 D1251472 D12522572 D1252272 D12530572 D1253072 D12606572 D1260672 D12614572 D1261472 D12622572 D1262272 D12630572 D1263072 D12706572 D1270672 D12714572 D1271472 D12722572 D1272272 D12730572 D1273072 D128065
d e e n v i r L e s m e a R e Dr ghts © Ri All ® d e e n v i r L e s m e a R e Dr ghts © Ri All ® TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine® Shower Doors and Enclosures please visit DreamLine.
