Installation Guide

Tools Needed

Parts Needed

INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 10

TIP

Use a metal file to

deburr the cut end

Fig 3

Glass Width (W) + 3/16” = (L)** (see exception below)

(L)

Cut the Bottom U-Channel to:

Out-of-plumb

at the bottom

<-If Less than 90°

Plumb line

**EXCEPTION:

If the wall is out-of-plumb

at the bottom, measure that

dimension as (A) and add (A)

to the finished cut length of

the U-channel (+1/2” max):

Glass Width + 3/16” + (A)

= Finished cut length (L)

wall is

out-of

-plumb