Installation Guide

13
UNIDOOR-X (STYLE M) manual Ver 2 11/2016
Quick-drying/fast curing silicone is
recommended for the installation
of hinge panel glass into u-channels.
Fig 10
Hinge Panel
Glass Bracket
with gasket
8-3/8”
7-7/8”
t
o
p
b
o
t
t
o
m
Cut and install two 2”pcs
of the 0.5 mm shims (#34)
into the bottom U-channel
to protect the corners of
the glass
Fig 9
7. Add the 0.5mm shims into the
bottom U-channel to protect the
bottom corners of the glass.
Apply a bead of silicone into the
length of the U-channels. (Fig 9)
8. Install the Hinge Panel Glass (#32) into
the U-channel, checking for level and plumb.
Install the gasket into the Hinge Panel Glass
Bracket. (Note: Make sure the top of the
hinge panel glass is at the top). (Fig 10)
©2017 DreamLine. All Rights Reserved