Installation Guide

“UNIDOOR (STYLE G)” Ver 1 Rev 5 06/2016

5. While securely holding the Stationary glass (11),

close the Glass Door and align the Stationary glass

to it. Use the door mark on the ledge as a reference

to ensure that the Door is perpendicular to the wall.

NOTE: The top of the Stationary glass must be

leveled with the Glass door. By traversing across

the top of both the Stationary glass and door,

height differences can be measured. The

Adjustment spacers (28) are provided to

compensate for such differences by inserting

them into the U-Channel 2 (bottom profile) (29).

Please make note of the spacer size that is needed

for your situation.

Ensure that the Stationary glass is level vertically and

precisely in line with Door. The U-channel 1 (wall

profile) (09) will remain flush against the wall.

Outline the position of the Stationary glass along

the inside edge of both U-channels on the wall and

half wall ledge.

Mark the U-channel 1 (wall profile) (09) at the top

horizontal glass edge. The height of this mark will

change if spacers are needed.

See Fig. 6 & 7 for details.

outside

inside

wall

inside

wall

inside

outside

Door

Stationary

glass

inside

wall

1/8"-3/16"

Align the Stationary

glass with the Door

inside

Door

Stationary

glass

Fig. 6

Fig. 7