Owner Manual

Tools

INLINE PANEL (STYLE F) Glass Installation Manual Ver 2 Rev 1 012020 4

Soft Head

Hammer

Ø1/8"

(3mm)

Drill Bit

Ø5/16"

(8mm)

Ø3/16"

(4mm)

Drill Bit

Professional-grade

Glass Suction Cup

(optional but recommended)

#2 Phillips

Driver Bit

Measure

Tape

PencilLevel

Drill

Power

Razor Knife

#2 Phillips

Screwdriver

100 % Silicone

Hacksaw

Work Gloves

Safety Glasses

Unpack your unit carefully and inspect it. Lay it out and identify all parts using the Detailed

Diagram on page 5; and parts list in this manual as a reference. Before discarding the

carton, check for small hardware bags that may have fallen to the bottom of the box. If any

parts are damaged or missing, please contact DreamLine

for replacement. The shipping

boxes may contain extra parts not used in your model configuration.

Retain these installation instructions for future reference.

NOTE

TIP

Cover the shower drain with tape prior to installation to prevent the

loss of screws or small parts.

Measure the finished opening before proceeding with the installation

to be sure that the correct model size has been ordered.

Use a good quality waterproof, mildew-resistant 100% silicone.

To prevent stripping the screw heads, set power drill to a low setting

when installing screws.

Mitre Saw

Metal File