Installation Guide

11 LUMEN shower door manual Ver 1 Rev 2 09/2018

Fig 7a

NOTE: For safety and to protect the Door Glass:

The door glass will need to be supported by shims

and/or an assistant until the Wall profile and Hinge

profile are screwed together.

ID groove

Wall profile Hinge profile

1/2”max adjustment

ID groove

Wall profile

Strike profile

1/2”max adjustment

inside

7a. Adjust the strike and hinge profiles within the wall profiles to center the door within the model

size range.

DO NOT adjust either profile more than 1/2”.

The ID groove on the hinge profile and strike profile should not be visible.

DO NOT over adjust the profiles beyond the ID groove .

(Fig 7a)