Installation Guide

© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
13 LUMEN shower door manual Ver 1 Rev 2 09/2018
©2018 DreamLine. All Rights Reserved
Fig 9a
1 3
2
Ø5/16”
(8mm)
5
ST4.2x40
4
Fig 9b
9. Open the door and remove the Strike Profile (#09) and leave the Wall Profile (#10) in position.
Mark the holes for drilling through the holes in the Wall Profile (#10).
Drill Ø5/16”(8mm) holes and insert the Wall Anchors (#16) into the holes.
Apply silicone to the back of the Wall Profile (#10) and around the screw holes.
Attach the Wall Profile (#10) to the wall using the ST4.2x 40 Truss Head Screws (#15).
(Fig 9a and Fig 9b)