Installation Guide

“PRISM” Ver.1 Rev.3 08/2015
8
Fig. 7
6. After final adjustments of both Stationary glasses (03),
drill the holes, on each end, through the predrilled holes
in the Wall profiles (02) into the first layer of the Glass
profiles (01) using Ø 1/8” drill bit.
Use the Round head screws ST4.2×10 (10) to secure
the Glass profiles inside the Wall profiles. Cover the
exposed screw heads with Decorative covers (09).
See Fig. 8 for details.
Fig. 8
1
2
3
4
5