Installation Guide

8Q-Wall 2 manual Ver 3 Rev 2 11/2015
Fig 8
Fig 9
6. Carefully measure the positions of the fixtures
relative to the Corner Acrylic Panel and drill
holes in the Side Acrylic Wall Panel with your
power drill using a hole saw attachment of the
proper diameter, which will accommodate the
shower head and mixing valves. Make sure that
all plumbing fixtures will easily fit through the
Side Acrylic Wall Panel and that the fixture
escutcheons (or trim rings) will completely cover
the holes.
See Fig 8 and Fig 9 for examples.