User Manual

Product Maintenance
Acrylic cleaning procedure:
Acrylic should be cleaned with warm water and a clean, non-abrasive cloth. If desired, a mild,
non-abrasive detergent may also be used. Use only light pressure when cleaning. Avoid rubbing
dirt or grit into the surface. Turn the cloth often and replace with a clean cloth frequently. Dry by
blotting gently with a clean, dry cloth.
DO NOT USE:
Window cleaning sprays, alcohol, kitchen abrasive compounds, or solvents (such as acetone,
gasoline, or thinners). Do not use ammonia based cleaning solutions on the acrylic as it will
damage the surface.
How do you get scratches out of Acrylic?
For light scratches, use a buffing compound such as a car wax. Use a buffer or lightly polish the
surface by hand until scratches disappear.
13Q-Wall 2 manual Ver 3 Rev 2 11/2015