Installation Guide

“PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016
6
2. Draw a line on the wall according to your
Shower Enclosure model size.
Product specifications:
Measured from the finished corner
to the outside edge of the glass
Model No
W1
W2
SHEN-GL2211-343410
34 3/8”
34 3/8”
SHEN-GL2211-363610
36 3/8”
36 3/8”
SHEN-GL2211-383810
38”
38”
SHEN-GL2211-404010
40 3/8”
40 3/8”
See Fig. 3 for details.
Fig. 3
3. Place the Stationary glass (01) and (03) onto the Shower
base, position against the wall and level vertically.
See Fig. 4 for details.
Note:
-Measure from the finished corner to the outside of the
glass as shown. Use the dimensions in the table in Step#2.
-The stationary glass must be installed at the correct
dimensions for your model size
-Make sure the Stationary glass is plumb and level.
Fig. 4
W1
W2
W1
W2
W1
W2