Installation Guide

“PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016

9. After final adjustments, secure both Stationary

glass panels to the threshold with the Bottom

brackets (12). Assemble the Bottom brackets (12)

through the holes in the Stationary panels.

Drill the holes in the Shower base through the holes

in the flange of the Bottom brackets using an

Ø 1/8” drill bit. Fasten the bottom brackets with the

Round head screw ST4.2×25 (08) and washer.

Cover the screw with the Decorative cover (10).

Install the Handle (06) to the Glass door (02).

See Fig. 13 for details.

Fig. 13

10. Apply good quality mildew-resistant silicone

along the connection of the stationary glass with

the walls and the Shower base/threshold.

Allow 24 hours for the silicone to fully cure

before using the shower.

See Fig. 14 for details.

Fig. 14