Installation Guide

“PRISM LUX / PYRAMID” Ver 3 Rev 3 01/2016

4. Outline the position of the Wall brackets (11) on the

wall.

Set both lites of Stationary glass (01), (03) aside.

Remove the Wall brackets (11) from the Stationary

glass and place them back in position with the outlines

to mark the holes for drilling on the wall.

Drill the holes in the wall using a Ø 5/16” drill bit and

insert the Wall anchors (07) for the Wall brackets.

Fasten the Wall brackets (11) to the wall using the

Round head screws ST4.2×55 (09).

See Fig. 5 for details.

Fig. 5

5. Place the Stationary glass (01) and (03) back into

the designated position, assemble the Wall brackets

(14) and tighten the bolts. Be sure to use the gaskets

to protect the glass.

See Fig. 6 and Fig. 7 for details.

Fig. 6