Installation Guide

7PRISM PLUS manual Ver 1 Rev 2 11/2016

Fig 3

Fig 4

Ø5/16"

(8mm)

Left-swing door installatiion shown for example

Fig 5

outside

inside

3. Mark the drilling holes on the wall through the predrilled

holes in the Stainless Steel U-channels (#11) .

Drill the holes in the wall using Ø 5/16”(8mm) drill bit and

insert the Wall anchors (#07).

Run a bead of Waterproof silicone along the back of the

Stainless Steel U-channels (#11) .

Fasten the Stainless Steel U-channels (#11) to the wall

using the Round head screw ST4.2×40 (#17).

See Fig 3 for details

5. Set the Stationary Glass 2 (hinge panel)

(#03) onto the threshold and into the Stainless

Steel U-channel (#11).

See Fig 5 for details

4. Install both of the Bottom Brackets

(#12) onto the panel glass (#01) &

(#03). Use the included gaskets to

protect the glass.

See Fig 4 for details