Installation Sheet

ManualsBrandsDreamLine ManualsBathPrism Plus 38 in. x 38 in. x 74.75 in. Semi-Frameless Neo-Angle Hinged Shower Enclosure in Satin Black with Shower Base

MODEL #s

SHEN-2634340-##

SHEN-2636360-##

SHEN-2638380-##

SHEN-2640400-##

##=finish

01- Chrome

04- Brushed Nickel

06- Oil Rubbed Bronze

09- Satin Black

PRISM PLUS

SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS

IMPORTANT

DreamLine

reserves the right to alter, modify or redesign products at any time without prior notice.

For the latest up-to-date technical drawings, manuals, warranty information or additional details please

refer to your model’s web page on DreamLine.com

For more information about DreamLine

Shower Doors & Tub Doors please visit DreamLine.com

Left-swing installation shown

PRISM PLUS manual Ver 1 Rev 2 11/2016

Summary of content (4 pages)

PAGE 1
PRISM PLUS SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine® reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.
PAGE 2
This model is treated with DreamLine’s exclusive ClearMaxTM Glass technology. This is a specially formulated coating that prevents the build up of soap and water spots. Install the surface with the ClearMaxTM label towards the inside of the shower. Please note that depending on the model, the glass may be coated on either one or both surfaces. For best results, squeegee the glass after each use and dry with a soft cloth.
PAGE 3
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
PAGE 4
Tools Tape Measure Level Silicone Pencil Soft Head Power Drill Drill bit Drill bit (Ø=5/16") (Ø=1/8") Phillips Screwdriver Mallet Wood 13/16” shim Hammer Tip: Measure the finished opening before proceeding with the installation to be sure that the correct model size has been ordered. W1 and W2 dimensions are measured from the finished corner of the walls to the outside edge of the wall profiles.