Installation Guide

Ver. 1, Rev. 1
5
3. Divide the measurement “W” by two
and place a mark in the center of the
back wall and from there draw a
plumb vertical line from top to
bottom.
This distance is shown as “W/2”.
See Fig. 3 for details.
Fig. 3
4. Determine the position of both Back
panels (09).
NOTE:
a) The Narrow side (2-3/4”) of the Back
panel cannot be trimmed and should face
the center of the back wall (as shown)
b) The Wide side (3-1/8”) of the Back panel
must be trimmed to the size of the back
wall if necessary, and should face the
corner.
See Fig. 4 for details.
Fig. 9
Fig. 4
W
/
2
W
/
2
3
1
/
8
"
2
3
/
4
"
2
3
/
4
"
3
1
/
8
"