Installation Guide

ManualsBrandsDreamLine ManualsBathInfinity-Z 32 in. x 60 in. x 76.75 in. Framed Sliding Shower Door in Chrome with Left Drain Base and Back Walls Kit

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015

4

Preparation for Installation of Back Panel

1. Place a mark on the walls at a distance of

1” (one inch) from the corner and draw

a plumb vertical line from top to bottom.

See Fig. 1 for details.

NOTE:

Repeat this step for both corners.

Fig. 1

2. The Shower back wall kit has two

Back Panels (09).

Measure the back wall of the shower

between the vertical lines you marked

in Step 1.

This distance is marked as “W”.

See Fig. 2 for details.

Fig. 2

W

1"

1"

1

2