Installation Guide

Q-Wall 5.2 (w/two back panels) manual Ver. 1 Rev. 2 08/2015
22
Product maintenance
To ensure long lasting life for your acrylic back walls, wipe them off after each use with a soft
cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never
use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
Acrylic cleaning procedure:
Acrylic should be cleaned with warm water and a clean, non-abrasive cloth. If desired, a
mild, non-abrasive detergent may also be used. Use only light pressure when cleaning.
Avoid rubbing dirt or grit into the surface. Turn the cloth often and replace with a clean
cloth frequently. Dry by blotting gently with a clean, dry cloth.
DO NOT USE:
Window cleaning sprays, alcohol, kitchen abrasive compounds, or solvents (such as acetone,
gasoline, or thinners). Do not use ammonia based cleaning solutions on the acrylic as it will
damage the surface.
How do you get scratches out of Acrylic?
For light scratches, use a buffing compound such as a car wax. Use a buffer or lightly polish
the surface by hand until scratches disappear.
TABLE OF CONTENTS
Required Tools for Installation …………………………………………………… Page: 2
Detailed Diagram with Packing List …………………………………………… Page: 3
Preparation for installation of Back Panel (09) ………………...………. Pages: 4 – 7
Preparation for installation of Side Panel (01) …..………………….…. Pages: 8 – 14
Back Panel and Side Panel Installation Instruction ………………….. Pages: 14 – 19
Glass Shelf (05) Installation Instruction ……….…………………………… Pages: 20 – 21