Installation Guide

Model Specific Preparation

INFINITY-Z Shower and Tub Door Manual Ver 5 Rev 1a 03/2019 3

1” Out-of-Plumb

Adjustment; Verify

threshold and walls

with a level

Threshold must be

level

Threshold must be level

This model has a 1” adjustment

wall profile siystem for

Out-of-Plumb wall conditions and

overall width within model size

when placed into finished

opening. For more infomation, see

the Adjustment Wall Profile

System on page 4.

Professional Installation

recommended.

Certied Professional

NOTE

For models with Frosted glass, install

the textured (Frosted) surface facing

towards the outside of the shower.

This door is reversible for right or left-hand door installation.

The left-hand door installation is shown as an example

throughout this manual. For the right-hand door installation,

flip the assembly from top to bottom so that the panel is on

the right side.

DO NOT attach the handle and/or

towel bar to the glass until instructed

to do so.

DO NOT attempt to use the

handle/towel bar to lift the glass

during installation. This may result in

damage to the glass and/or serious

injury. Always use a professional

grade glass suction cup and an

assistant.

Panel Panel

Door Door

L R

TIP

1”

minimum

at threshold

1” max