Installation Guide

Ver. 1, Rev. 1
4
Preparation for Installation of Back Panel
1. Place a mark on the walls at a distance of
1” (one inch) from the corner and draw
a plumb vertical line from top to bottom.
See Fig. 1 for details.
NOTE:
Repeat this step for both corners.
Fig. 1
2. The Shower back wall kit has two
Back Panels (09).
Measure the back wall of the shower
between the vertical lines you marked
in Step 1
.
This distance is marked as “W”.
See Fig. 2 for details.
Fig. 2
W
1"
1"
1
2