Installation Sheet

Table Of Contents

INFINITY-Z manual Ver 4 Rev 5 06/2017 8

Fig 7

Fig 6

Inside

ATTENTION: To prevent scratching or

damaging the glass and aluminum: Do Not use

a screwdriver or other metal object to insert the

Single Side Strip (#08)

Bottom rail

cut away to

show detail

add a bead of

silicone to the

bottom rail (optional)

prior to installing the

stationary glass

NOTE: Use caution when installing the stationary

glass into the frame to prevent damage to the

edges of the glass.

6. Starting from the bottom, insert the Single Side Strip (#08)

into the groove between the glass and the glass profile using a

wooden or plastic shim. The strip should be inserted from the

side that will face inside the shower.

7. Repeat Step #3, Step #4, Step #5 and Step #6 to fasten the

Top Guide Rail (#03) to the Glass Profiles (#01) and secure the

Stationary Glass (#05) with the remaining Glass Holder (#16)

and Flat Head Screw ST4.2 x 16 (#12). (Fig 7)

5. Slide the Stationary Glass (#05) fully into the groove

of the Glass Profile (#01), and then secure the Glass

Holder (#16) to the Bottom Guide Rail (#03) with the

Flat Head Screw ST4.2x16 (#12). (Fig 6)