Installation Guide

“SLIMLINE SHOWER BASE” Rev.3 Ver.5 07/2013
12
Shower Base Installation Preparation
1. Ensure that the floor and the studs
are at right angle.
Provide a 5”×5” opening in the sub-
floor for the drain.
The 2” PVC waste pipe should
extend above the surface of the
sub-floor according to the drain
installation instructions and the
height of the Shower base.
Refer to the product drawings in
these installation instructions for the
drain location.
See Fig. 1 and Fig. 2 for details.
Fig. 1
Fig. 2
(See Product Chart for Drain Location)
(5"×5") Opening
2" PVC Waste Pipe
90°
90°
90°
90° 90°
2" PVC Waste Pipe
(5"×5") Opening
(See Product Chart for Drain Location)