Installation Sheet

Tools

Tip: Measure the finished opening before

proceeding with the installation to be sure

that the correct model size has been

ordered.

Tip: Prior to installation, cover the

shower/tub drain with tape to prevent

losing screws or small parts.

Tip: Set screw gun clutch to low setting

when installing screws and bolts to

prevent stripping the heads.

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in this manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine

for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

INFINITY-Z manual Ver 4 Rev 5 06/2017 3

Tape

Measure Pencil

Screwdriver

Phillips

Level

Silicone/Caulk

Hammer

Miter saw or Hacksaw

(Ø=1/8")

Drill bit

(Ø=5/16")

Drill bit

(D=8mm)

(D=3mm)

Drill

Power

Top

Middle

Bottom