Installation Guide

“MIRAGE - 48” Rev. 2 Ver. 4 07/2013 9
NOTE: Please refer to Sliding bracket assembly (09) diagram
on Page 4.
9. Disassemble the Sliding bracket assembly.
Mount the Face Plate (A) and Back Plate (B) on the top of
Stationary glass A (01) with the Head screw M6×16 (G).
Use PVC gasket (D) and PVC washer (E) in between glass
and metal parts.
NOTE: Use only hand tools. Do not over tighten the screws.
See Fig. 9 and Fig. 10 for details.
Fig. 9
Fig. 10
1
2