Full Product Manual

“MIRAGE - 48” Rev. 2 Ver. 4 07/2013 10
10. Install the Stopper block (11) on the bottom of
the Glass door (02).
See fig. 11 for details.
Fig. 11
11. Bring the Glass door (02) inside the shower.
Remove nuts from the Roller assembly (10)
bolts and spread the rollers against the
installation holes on the Glass door. Fasten
the Roller assembly to the Glass door
through the predrilled holes.
NOTE: Steps 11 and Steps 12 require
second person to hold Glass door. The
Glass door will not stay by itself until you
finish the Step 12.
See Fig. 12 for details
Fig. 12
1
2
1
2
3
4