Full Product Manual

“MIRAGE - 48” Rev. 2 Ver. 4 07/2013 8

7. Outline the position of the Wall bracket (12) on

the wall. Set Stationary glass (01) aside.

Remove the Wall bracket from Stationary glass

and by replacing it to the outlined position mark

the hole on the wall.

Drill the hole using Ø 5/16” drill bit, insert the

Wall anchor (06) and fasten the Wall bracket

to the wall with the Round head screw

ST4.2×55 (07).

Put Stationary glass back into position and tight

it up to the Wall Bracket.

See Fig. 7 for details.

Fig. 7

8. Push the Single side strip (13) between the groove of the Guide

rail (03) and Stationary glass (01) using wooden shims or other

piece of wood.

See fig. 8 for details.

Fig. 8

Ø 5/16”